SERVICE
AND ADJUSTMENTS
TO ADJUST S'FEERING WHEEL ALIGNMENT
If steering wheel crossbars are not horizontal (left to right)
when wheels are positioned straight forward, remove
steering wheel and reassemble per instructions in the
Assembly section of this manual.
FRONT WHEEL TOE-INICAMBER
The front wheel toe-in and camber are not adjustable on
your tractor. If damage has occurred to affect the front
wheel toe-in or camber, contact your nearest authorized
service center.
TO REMOVE WHEEL FOR REPAIRS
(See
Fig.
24)
Block up axle securely.
Remove axle cover, retaining ring and washers to
allow wheel removal (rear wheel contains a square
key
-
Do not lose).
Repair tire and reassemble.
On rear wheels only: align grooves in rear wheel hub
and axle.
Insert square key.
Replace washers and snap retaining ring securely in
axle groove,
Replace axle cover.
NOTE:
To seal tire punctures and prevent flat tires due to
slow leaks, tire sealant may be purchased from your local
parts dealer. Tire sealant also prevents tire dry rot and
corrosion.
AXLE COVER
SQUARE KEY
(REAR WHEEL ONLY)
FIG.
24