Waves LFE360º software guide page 3 of 3
LFE 360° Controls and Displays
F
REQUENCY: 20Hz to 250Hz. Default:120Hz.
This selects the cutoff frequency above which the filter will roll off with its steep
response
G
AIN: 0.0 to –12dB. Default: 0.0dB
TRIM: Click to trim.
The Gain control can reduce the gain down to –12 dB. The intended application
is clip prevention. The Trim control located under the LFE output meter will
update with the amount of overshoot and will reduce the Gain by the indicated
amount.