Filter
Top Products
Operating Instructions Page 15
SLEEP MODE
The Sleep Mode operation is a feature that minimizes pump operation during quiet evening hours. For example, if
Filter Cycle 1 (F1) is set to activate at 8:00 a.m., by default, Filter Cycle 2 (F2) will activate at 8:00 p.m. (12 hours later).
During 8:00 p.m. to 8:00 a.m., if the spa should call for heat, the pump and heater will activate to heat the spa under
normal temperature demand. However, when in Sleep Mode, should the spa call for heat, the pump and heater will
be suspended after Filter Cycle 2 (F2) until the activation of Filter Cycle 1 (F1), at 8:00 a.m. to minimize pump
activation during quiet evening hours.
Important: Power-up of the spa starts the F1 sequence. In order for the sleep mode to work in the evening hours, the spa must be powered up in
the early morning hours. The Sleep Mode will always be active the 6-12 hours between the end of (F2) and the begining of (F1) depending on how
the filter cycle program is set.
Note: If temperature drops below 80 degrees, heater will automatically activate to prevent spa from freezing.
To activate Sleep Mode feature, press and hold Temp Up (
▲
) & Temp Down (▼) buttons together for 3 seconds. This will activate the feature and
override the normal temperature demand. When these buttons have been engaged, a Moon & Stars icon (Sleep Icon) will appear in the display of
the control panel, indicating this feature has been activated. To deactivate this feature, simply press and hold Temp Up (
▲
) & Temp Down (▼)
buttons together for 3 seconds once again.
LOCKING FEATURES
The locking features, TEMPERATURE LOCK and SPA LOCK, are enabled from the control panel by a specific combination of buttons. Once
enabled, a lock will remain active until the specific button combination is applied to disable the lock. Even if power is disconnected from the spa
and soon thereafter reapplied (such as a power outage), the lock will remain in place.
SPA LOCK
The Spa Lock feature deactivates all of the functions of the control panel. It is generally used to prevent unwanted
use of the spa.
To activate the Spa Lock, press SET button. When the SET icon flashes press the Temp Down (▼) button. Do not
press any other button on the control panel until the SET icon stops flashing.
SLOC is then displayed.
To deactivate the Spa Lock, press SET button. When the SET icon flashes press Temp Down (▼) button. Do not
press any other button on the control panel until the SET icon stops flashing. The
SLOC is no longer displayed.
TEMPERATURE LOCK
The Temperature Lock feature deactivates the temperature control function from the control panel. All other functions
on the control panel will operate normally. Temperature Lock is most often used by those who do not want others to
change the set temperature of the spa water.
To activate the Temperature Lock, press SET button. When the SET icon flashes press the Temp Up (▲) button. Do
not press any other button on the control panel until the SET icon stops flashing.
TLOC is then displayed.
To deactivate the Temperature Lock, press SET button.
When the SET icon flashes press the
Temp Up (▲) button.
Do not press any other button
on the control panel until the SET icon stops flashing. TLOC is no longer displayed.
MUSIC SOUND SYSTEM
The La Palma
TM
music spa comes equipped with a music system and includes the following:
• JBL Stereo
• Four Bartop Speakers
• Bartop Stereo Control Panel Mode Button
NOTE: The operating instructions for the CD AM/FM Stereo have been included in the spa’s Owner’s Packet.
STEREO CONTROL PANEL MODE BUTTON
• Press “ ” to turn stereo on and off
• Press “BAND” button - to switch between FM1,2,3 and AM.
• Press “MODE” button - to source between CD/AM/FM/CD Changer.
• Press “VOL
▲
” button - to increase volume.
• Press “VOL ▼ ” button - to decrease volume.
• Press “TRACK
▲
or ▼ ” button - to advance to the next track (in CD mode).
• Press “TRACK
▲
or ▼ ” button - to advance to the next available station (in radio mode).
SET
READY
F1
F2
READY
READY
READY
READY
READYREADY
READY
READY
F1
SET
READY
F1
F2
SET
F1
F2
SET
READY
F1
F2
READY
SET
READY
F1
F2
READYREADY
READY
READY
READY
READY
READY
READY
F1
SET
READY
F1
F2
SET
F1
F2
SET
READY
F1
F2
READY
SET
READY
F1
F2
READY
READY
READYREADY
READY
READY
READY
READY
F1
SET
READY
F1
F2
SET
F1
F2
SET
READY
F1
F2
READY