Troy-Bilt TBTB Blower User Manual


 
4
RULES FOR SAFE OPERATION
Inspect all extension cords and the unit power
connection periodically. Look closely for deterioration,
cuts or cracks in the insulation. Also inspect the
connections for damage. Replace the cords if any
defects or damage appear.
Prevent disconnection of the turbo blower powerhead
from extension cord during operation by using a plug-
receptacle retaining strap, connector, or by making a
knot as shown below:
Avoid dangerous environments. Never operate your
unit in damp or wet conditions. Moisture is a shock
hazard.
Do not use the unit in the rain. Do not use in or around
water.
Do not handle the plug or unit with wet hands or
standing on any wet surfaces.
Do not leave the unit plugged in when not in use,
changing attachments or add-ons, or while being
serviced.
WHILE OPERATING
Keep bystanders, especially children and pets, at least
50 ft (15 m) away.
Wear safety glasses or goggles that are marked as
meeting ANSI Z87.1 standards, and ear/hearing
protection when operating this unit. Wear a face or
dust mask if the operation is dusty.
Wear heavy, long pants, boots, gloves and a long
sleeve shirt. Do not wear loose clothing, jewelry, short
pants, sandals or go barefoot. Secure hair above
shoulder level.
Use the unit only in daylight or good artificial light.
Use the right tool. Only use this tool for the purpose
intended.
Do not overreach, take extra care when working on
steep slopes or inclines. Always keep proper footing
and balance.
Always hold the unit with both hands when operating.
Keep a firm grip on both the front and rear handle or
grips.
Keep air intake opening clear of debris while blowing.
Never operate the unit without the a nozzle installed.
Never attempt to clear a clogged nozzle with the
engine/motor running.
Do not force unit. It will do the job better and with less
likelihood of injury at a rate for which it was designed.
Do not operate the engine faster than the speed
needed to do the job. Do not run the engine at high
speed when not in use.
Always stop the engine/motor when operation is
delayed or when walking from one location to another.
.•If you strike or become entangled with a foreign object,
stop the engine/motor immediately and check for
damage. Have any damage repaired before attempting
further operations.
Stop the unit IMMEDIATELY if you feel excessive
vibration. Vibration is a sign of trouble. Inspect
thoroughly for loose nuts, bolts or damage before
continuing. Repair or replace affected parts as
necessary.
Stop and switch the unit to off for maintenance, repair,
or for changing add-ons or other attachments. The unit
must be stopped and the impeller no longer turning to
avoid injury.
Use only genuine factory replacement parts and
accessories for this unit. These are available from
your authorized service dealer. Use of any unauthorized
parts or accessories could lead to serious injury to the
user or damage to the unit, and void your warranty.
OTHER SAFETY WARNINGS
Allow the unit to cool before storing or transporting. Be
sure to secure the unit while transporting.
Store the unit in a locked up and dry or high and dry
place to prevent unauthorized use or damage, out of
the reach of children.
Never douse or squirt the unit with water or any other
liquid. Keep handles dry, clean and free from debris.
Clean unit and labels with a damp sponge. Clean after
each use.
Keep these instructions. Refer to them often and use
them to instruct other users. If you loan someone this
unit, also loan them these instructions.
Only qualified personnel should perform any repairs
or maintenance procedures that are not described
in this manual.
Check engine mounting bolts and other bolts at
frequent intervals for proper tightness to be sure the
equipment is in safe working condition.
Inside a building store the machine away from ignition
sources. Allow the engine to cool before storing in any
enclosure.
Always refer to the Operator’s Manual instructions for
important details if the unit is to be stored for an
extended period.
Do not attempt to repair the machine unless you have
the proper tools, and instructions for disassembly and
repair of the machine.
SAVE THESE INSTRUCTIONS
Extension
Cord
Turbo Blower
Cord
Turbo Blower
Cord
Extension
Cord