Filter
Top Products
Mower Set-Up
Attaching the Handle
Secure the upper handle to the mid handles with two 1.
carriage bolts, two saddle washers and two wing knobs.
See Fig. 3-1.
Secure the handle assembled in step 1 to the lower handle with 2.
four carriage bolts, four saddle washers and four wing
knobs. See Fig. 3-2.
Position the complete handle assembly over the studs on the 3.
rear of the mower frame. See Fig. 3-3.
Figure 3-2
Figure 3-3
Figure 3-1
Contents of Crate
One Upper Handle• Two Mid Handles• One Lower Handle•
Six Carriage Bolts• Six Wing Knobs• Six Saddle Washers•
One Grass Catcher (TB R18 Only)• One Operator’s Manual• One Product Registration Card•
Assembly & Set-Up
3
5