Filter
Top Products
Parking Brake
To set the parking brake, fully depress the clutch-
brake pedal. Move the speed control lever all the
way down and into the parking brake position.
Release the clutch-brake pedal to allow the
parking brake to engage.
To release the parking brake, depress the clutch-
brake pedal and move the speed control lever
out of the parking brake position into the desired
position. Release the clutch-brake pedal.
NOTE: The parking brake must be set if the
operator leaves the seat with the engine running
or the engine will automatically shut off.
RUN
PARK
BRAKE
ON
PARK
BRAKE
OFF
Deck Lift Lever
Found on your tractor’s right fender, the deck lift
lever is used to change the height of the cutting deck.
To use, move the lever to the left, then place in the
notch best suited for your application.
PTO (Blade Engage) Lever
Found on the tractor’s right fender, the PTO (blade
engage) lever is used to engage power to the cutting
deck. To operate, move the lever all the way forward.
Moving the lever all the way rearward into the PTO
OFF position disengages power to the cutting deck.
NOTE: The PTO (blade engage) lever must be in the
disengaged (PTO OFF) position when starting the
engine.
14 Section 4— controlS & FeatureS