Filter
Top Products
FPO
ENGLISH
BLOWER ASSEMBLY
Assembling Blower
Follow the steps below to assemble
the blower.
WARNING: To Re-
duce The Risk of Per-
sonal Injury or Electric
Shock – Disconnect from
power source before as-
sembling or changing at-
tachments.
Figure 1 - Sliding blower tube into place
Figure 2- Fasten with mounting screws.
1. Slide the blower tube competely
onto outlet on front of blower
housing with the curved end of
the blower tube facing up. (See
Figure 1)
2. Fasten with the two mounting
screws. (See Figure 2)
7