Troy-Bilt TB130 Lawn Mower User Manual


 
Assembly & Set-Up
3
9
Contents of Carton
  
  
NOTE: 
the low and high wheel models of this mower. While this manual
illustrates the low wheel model, the instructions and features
are equally applicable to the high wheel model as well, unless
otherwise noted.
Assembly
NOTE: This unit is shipped without gasoline or oil in the engine.
Fill up with gasoline and oil as instructed in the accompanying

Handle
Remove any packing material which may be between 
upper and lower handles.
Remove wing nuts and carriage bolts from handle as a.

hex head screws.
Figure 3-1
b.
upper handle up as shown in Fig. 3-2. Do not crimp
cable while lifting the handle up.
Figure 3-2
A
A
B