Figure 6-2
5. Turn the water on.
the engine and place the throttle/choke lever in the FAST
(rabbit) position.
7.
position.
8.
engaged for a minimum of two minutes, allowing the
underside of the cutting deck to thoroughly rinse.
position.
Turn the water off and detach the hose coupler from the
cutting deck.
After cleaning your deck with the deck wash system, return to
deck running for a minimum of two minutes, allowing the
underside of the cutting deck to thoroughly dry.
Lubrication
WARNING! Before lubricating, repairing, or
parking brake, stop engine and remove key to
prevent unintended starting.
Front Wheels
Each of the front wheel axles and rims is equipped with a grease
grease applied with a grease gun after every 25 hours of tractor
operation.
Figure 6-3
Pivot Points & Linkage
Lubricate all the pivot points on the drive system, parking brake
and lift linkage at least once a season with light oil.
Deck Wheels
a grease fitting. Lubricate with a No. 2 multi-purpose grease
applied with a grease gun after every 25 hours of tractor
operation.
21Section 6 — Maintenance & adjuStMentS