Troy-Bilt 769-04000A Snow Blower User Manual


 
Replacing Belt
Remove the belt cover by removing the five hex screws 

Remove the belt by grasping it from the bottom of the 2.
auger pulley and pulling outward.
NOTE: 

To replace the belt follow these instructions and refer to Fig. 7-2:

2.
belt keeper.
Route the belt around the engine pulley.3.

Reinstall the belt cover removed earlier.5.
Idler Pulley
Belt Keeper
Hex Screws
Figure 7-1
Figure 7-2
Engine Pulley
Auger Pulley
1
4
3
2
Service
8
18