Filter
Top Products
5
Decals
For your safety and the safety of others, vari-
ous safety and operational decals are located
on your unit (see Figure 1-2).
Keep the decals clean and legible at all times.
Contact your local service dealer or the factory
for replacements if any decals are damaged or
missing.
Refer to the Parts List pages in this Manual for
decal locations, descriptions and part num-
bers.
Figure 1-2: Location of safety and operating decals.
TO AVOID SERIOUS INJURY:
• READ THE OWNER’S MANUAL.
• KNOW LOCATIONS AND FUNCTIONS OF ALL CONTROLS.
• KEEP ALL SAFETY DEVICES AND SHIELDS IN PLACE AND WORKING.
• NEVER ALLOW CHILDREN OR UNINSTRUCTED ADULTS TO OPERATE TILLER.
• SHUT OFF ENGINE AND DISCONNECT SPARK PLUG WIRE BEFORE MANUALLY UN-
CLOGGING TINES OR MAKING REPAIRS.
• KEEP BYSTANDERS AWAY FROM MACHINE.
• KEEP AWAY FROM ROTATING PARTS.
• USE EXTREME CAUTION WHEN REVERSING OR PULLING THE MACHINE TOWARDS
YOU.
Operating Symbols
Various symbols (shown here, with word descriptions)
may be used on the tiller and engine.
NOTE: Your unit may not have all of the symbols.
Forward Clutch Bail
Starting Stabilization
Message (on engine)
Hot Surfaces Warning
Warning Messages
Reverse Clutch Control
Operating Instruction
(Models 634F/634A)
FAST SLOW STOP TILLER DIRECTION LEVER DIRECTION
ROTATING TINES
REVERSE
BAIL
DISENGAGED
BAIL
ENGAGED
R
WARNING
CHOKE
OFF
CHOKE
ON