Filter
Top Products
8
4
Operating
Your Log
Splitter
WARNING
Figure 4-1
Know Your Log Splitter
Beam Locks
These two locks, as their name suggests, are used
to secure the beam in the horizontal or the vertical
position. The vertical beam lock is located next to the oil
filter. The horizontal beam lock is located on the beam
support latch bracket. See Figure 4-1.
Engine Controls
See the accompanying engine manual for the location
and function of the controls on the engine.
IMPORTANT
Your log splitter is
shipped with motor oil
in the engine. However,
you MUST check the
oil level before operat-
ing. Be careful not to
overfill.
Horizontal Beam Lock
Vertical Beam Lock
Control Handle
We
dge
Cylinder
Tongue
Log
Dislodger
Jack Stand
Beam Assembly
Log Cradle
Ta
il Light
(If Equipped)
Vertical
Beam
Lock