Filter
Top Products
10
How to Stop Pressure Washer
• Turn engine off according to instructions given in engine
owner’s manual.
• Squeeze trigger on spray gun to relieve pressure
in hose.
NOTE: A small amount of water will squirt out when you
release the pressure.
How to Use Adjustable Nozzle
You should now know how to START and STOP your
pressure washer.The information in this section will tell
you how to adjust the spray pattern and to apply detergent
or other cleaning chemicals.
1. Slide nozzle forward when you wish to adjust spray to
low pressure mode (Figure 9). Slide nozzle backward
to achieve high pressure.
2. Point nozzle down towards a firm surface and press
trigger to test spray pattern (Figure 10).
3. Twisting nozzle adjusts spray pattern from a narrow
pattern to a fan pattern (Figure 11).
4. For most effective cleaning, keep spray nozzle from
8 to 24 inches away from cleaning surface.
5. If you get spray nozzle too close, especially using high
pressure mode, you may damage surface being cleaned.
6. DO NOT get closer than 6 inches when cleaning tires.
Slide nozzle backward
for high pressure mode.
Slide nozzle forward for
low pressure mode and
detergent application.
Figure 9 - Adjusting Spray Pressure
Twist nozzle
counterclockwise for fan
spray pattern.
Twist nozzle clockwise
for narrow spray
pattern.
Figure 11 - Adjusting Spray Pattern
Figure 10 — Test the Spray Pattern
Section 4: Operation
• NEVER adjust spray pattern when spraying.
• NEVER put hands in front of nozzle to adjust spray pattern.
A pressure washer produces a high pressure spray
which increases risk of injury and damage to unit.
CAUTION