Filter
Top Products
12
TROY-BILT
®
5.5 HP TILLER MODEL 12183
REF PART
No. No. DESCRIPTION QTY.
REF PART
No. No. DESCRIPTION QTY.
TRANSMISSION HOUSING, COVERS, SEALS, GASKETS & PLUGS
NOTE 1:
THESE SCREWS ARE A SPECIAL
SEALING SCREW THAT CAN NOT BE
REUSED WITHOUT RISKING THE
LOSS OF TRANSMISSION OIL.
IF THESE SCREWS ARE LOOSENED
OR RE-MOVED, THEY MUST BE
REPLACED WITH NEW HARDWARE.
* Specify GRADE 5 if ordering part locally. A/R – As Required
1 9621 Oil Seal–double lip, wheel shaft .... 2
2 9726 Plug–pipe, 1/4............................... 2
3 97076 Seal–transmission bore ................ 1
4 1186329 Screw–flanged hex hd.,
5/16-18 x 3/4*........................... 6
5 85030 Oil Seal–input pinion shaft ............ 1
6 11513 Cover–top of transmission (incl.
four of Ref. No. 18 and two
each of Ref. No.’s 21 and 22) .... 1
7 20694 Gasket–transmission top cover..... 1
8 20893 Transmission case, tube and rear
housing assembly...................... 1
9 9467 Plug–gear oil fill hole .................... 1
10 20889 Plate–wheel drive cable mounting. 1
11 97073 Oil Seal–tiller shaft........................ 2
12 90038 Screw–flanged hex hd.,
5/16-18 x 5/8*........................... 2
13 20873 Cover–tiller housing, left side........ 1
14 1129-1 Gasket–tiller housing cover, .010.. A/R
15 1915089 Screw Kit: includes three (3)
1/4-20 x 7/8 self-sealing
screws................................ . . . A/R
16 1115 Cap–rear bearing........................... 1
17 1124-2 Gasket–rear bearing cap, .010
thick........................................... A/R
18 1186331 Screw–flanged hex hd.,
5/16-18 x 1*.............................. 4
19 1915087 Screw Kit: includes five (5)
1/4-20 x 5/8 self-sealing
screws ...................................... A/R
21 1100243 Lockwasher–3/8............................ 2
22 1100068 Screw–hex hd., 3/8-16 x 3/4*....... 2