Filter
Top Products
4
Installation Instructions
Note: The installation diagram shows a B156-002, but installation will be the same for the
B156-002-DVI and B156-002-HDMI.
1
Make sure the DisplayPort source is powered off.
2
Connect the source to the input port on the splitter using a P580-
Series DisplayPort cable (or a P583-Series Mini DisplayPort to
DisplayPort Cable). Note: The distance between the source and
splitter must not exceed 16 ft. (5 m).
3
Connect the included external power supply to the splitter, and plug
it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU),
or Uninterruptible Power Supply (UPS). The Green Power LED on the
splitter will illuminate to indicate the unit is receiving power.
4
Connect a monitor to the Output 1 port on the splitter using a
DisplayPort (for B156-002), DVI (for B156-002-DVI), or HDMI (for
B156-002-HDMI) cable. Note: See the Optional Accessories listing
in this manual (under Package Contents) for recommended cables.
The distance between the splitter and monitor must not exceed 35 ft.
(10.6 m).
UP TO 35ft.
(10.6m)
UP TO 16ft. (5m)
B156-002
13-03-220-93323C.indd 4 3/19/2013 3:41:04 PM