Filter
Top Products
SAFETY PRECAUTIONS
Safety Precautions for Installation and Wiring
Do not disconnect while circuit is live unless location is known to be nonhazardous.
’
Live part of electric circuit or a high temperature department can cause explosion.
Do not modify or disassemble the enclosure.
’
Strength degradation and defects of enclosure can cause explosion.
Do not use parts of other products.
’
Protective performance degradation for hazardous location can cause explosion.
Do not touch live circuits until assembly of all components is not over.
’
Protective performance degradation for hazardous location can cause explosion.
Install per the National Electrical Code for the US (NEC, ANSI/NFPA 70) and the
Canadian Electrical code for Canada (CEC, CAN/CSA-C22.1) and the drawing
3S8A2532, 3S8A2676 and 3S8A2677 (Refer to Appendix 1.).
Unsuitable conduit connections for hazardous location can cause explosion.