Toro TR50 Sprinkler User Manual


 
© 2003 The Toro Company, Irrigation Division An ISO-9000 Certified Company www.toro.com Form Number 373-0290 Rev. A
The TR50 sprinkler comes
with eight additional nozzle
sizes from 1 to 9 GPM. To
change the nozzle, use the
blade end of the sprinkler tool
or a screwdriver to turn the
nozzle screw out until it clears
the nozzle. Pry the nozzle out
at the bottom and install the
new nozzle. Return the nozzle
screw to its previous position.
Turn the nozzle screw in to diffuse and
shorten the spray radius.
To prevent low head
drainage, install check
valve disk in position B.
Remove and
flush screen
as needed.
Changing Nozzle
Adjusting Spray Cleaning Screen
Install Check Valve
Align riser
with body as
shown when
reassembling.
P/N 102-1303
P/N 102-2802