Filter
Top Products
IMPORTANT: True Manual operation
will override all flow-sensing
limits.True Manual Operation
1. Turn Function Dial to Manual Stations .
2. Press the button as needed to select
the station number.
3. Press the button to start the station.
ON will be displayed with the icon
(flashing).
NOTE: The station will run continuously
until any navigation button is pressed
or the Function Dial is turned. The station
will turn off automatically at Midnight if
left unattended.
Timed Manual Operation
1. Turn Function Dial to Manual Stations .
2. Press the button to select the station
number.
3. Press the or button to select a
manual run time (1 minute – 8 hours).
4. To select additional stations, repeat
steps 2 and 3.
5. When station selections have been
made, turn the Function Dial to RUN .
• The operating station number(s),
remaining station run time and icon
will begin alternating with the current
time of day.
• The stations will operate in the order
selected, either sequentially or
concurrently as determined by
the
Stack/Overlap option selection.
Manual Station Operations
4