Filter
Top Products
2014 Toro Commercial Equipment Guide 14-003-T Rev. 1/14
78
HYDRAULIC SYSTEM
PUMP
A three section gear pump provides hydraulic flow to power the cutting units, power steering and cutting unit lift.
CONTROL BLOCKS
All hydraulic functions are controlled by two integrated hydraulic control blocks utilizing cartridge type relief valves, solenoid controlled proportional valves and
solenoid operated directional control valves.
REEL SPEED CONTROL
Reel drive circuit is split into front and rear independent circuits. Each circuit has a manually adjustable control for reel speed and backlap adjustment.
LIFT CYLINDERS
All lift and lower sequences are controlled by the ECU.
HYDRAULIC OIL RESERVOIR
100% of oil from reservoir passes through a 100 mesh suction strainer before entering the reel drive circuit. 8.5 gallon (32 liter) capacity.
HYDRAULIC OIL
FILTER
11 gram capacity at 10 gallon (37 liter) per minute flow Average Beta = 20 at 3 micron. Filter head has integral 50 psi (3.4 bars) bypass and a true differential
pressure service indicator.
Reelmaster
®
6500-D & 6700-D Specifications*
REELMASTER 6500-D
MODEL 03806, 2WD OR MODEL 03807, 4WD
REELMASTER 6700-D
MODEL 03808, 4WD
ENGINE
Kubota
®
V1505-T liquid-cooled diesel engine. 4-cylinder, over-head valve. 1.5 liter displacement. Turbo-charged. 44.2 hp (33 kW) gross rated, 42 hp (31.3 kW) net
at 3000 rpm. 40 amp alternator. Donaldson two-stage air cleaner with safety filter and restriction indicator.
RADIATOR
Rear mounted, cross-flow 6.3 fins per inch. Cooling system capacity is 10 quarts (9.5 liters). Air to oil cooler with 2 rows, 6 fins per inch, mounted in front of
radiator tips outward for cleaning. Removable oil cooler/radiator screen.
ELECTRICAL
FEATURES
12-volt, 650 cold cranking amperes at 0°F (-18°C), 105 minute reserve capacity at 80°F (27°C), maintenance free battery. 1.4 kW electric starter. 40 amp
alternator with I.C. regulator/rectifier. Automotive type electrical system. Seat switch, reel and traction interlock switches.
FUEL SYSTEM
Bosch
®
in-line fuel injection pump with energized-to-run (ETR) fuel flow solenoid. Replaceable spin-on fuel filter/water separator.
Fuel capacity: 15 gallons (57 liters). 2008 models Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petroleum blend).
CONTROLS
Foot operated traction and brake pedals. Hand operated throttle, traction speed limiter, parking brake latch, ignition switch, single joystick control for cutting unit
on/off and lift/lower. Reel speed and backup controls located under the hood.
GAUGES
Hour meter, speedometer, fuel gauge, engine coolant gauge, and warning light cluster: engine oil pressure, high engine temperature, charge indicator, glow plug.
Reel control lamp that lights to indicate glow time, controller fault, and high mow speed warning.
DIAGNOSTICS
The Automatic Control Electronics, ACE™ system allows precision timing and control of machine functions for maximum reliability. Optional diagnostic display
connects to an electronic control unit to pinpoint any electrical problems quickly and easily. Available DATA LOG™ system allows mechanic to find intermittent
problems. Diagnostic test ports are provided for front and rear cutting unit drive, cutting unit lift, steering, and hydrostatic transmission charge pressure.
TRACTION DRIVE
Power to the front drive wheel is via servo-controlled hydrostatic pump operating individual fixed displacement axial piston wheel motors that operate a planetary
gear final drive assembly. Foot pedal control of forward/reverse ground speed.Toro 4-Matic
®
4WD System only: couples rear drive axle to hydrostatic transmission
via overrunning clutch for full time on-demand 4WD. A Roll Over Protection Structure (ROPS) and seat belt are standard on 4WD models.
GROUND SPEED
0-10 mph (0-16.1 km/hr) forward; 0-4 mph (0-6.4 km/hr) reverse.
TIRES/WHEELS/
PRESSURE
Two rear steering tires: 20 x 10-10, tubeless, 6-ply rating. Two front traction drive tires: 29 x 14-15, tubeless, 6-ply rating. Recommended tire pressure: 10-15 psi
(59-103 kPa).
MAIN FRAME
All welded steel frame includes tie-down loops.
BRAKES
Wet triple disc brakes on front planetary assemblies may be actuated individually for service brakes or locked together for transport or parking brakes. Dynamic
braking through hydrostatic traction drive.
STEERING
Power steering with dedicated power source.
SEAT
Deluxe seat with adjustable suspension and fore-aft location. Optional Armrest Kit, Model 30707.
ROPS
A 2-post ROPS with seat belt and optional canopy; standard on Models 03807 and 03808, optional on Model 03806.
OVERALL
DIMENSIONS
Height Length Transport Width Operational Width Wheel Tread Wheelbase
Models 03806/03807: 60" (152 cm) w/o ROPS 120" (305 cm) 84" (213 cm) 110" (279 cm) 72.25" (178 cm) - front 58" (147 cm)
84" (213 cm) w/ ROPS 41" (104 cm) - rear
Model 03808: 84" (213 cm) w/ ROPS 120" (305 cm) 84" (213 cm) 147" (374 cm) 72.25 (178 cm) - front 58" (147 cm)
41" (104 cm) - rear
NET WEIGHT WET
Model 03806: 3,100 lbs. (1,407 kg) with 5-blade cutting units and full fluid levels.
Model 03807: 3,200 lbs. (1,453 kg) with 5-blade cutting units and full fluid levels.
Model 03808: 3,850 lbs. (1,748 kg) with 5-blade cutting units and full fluid levels.
SOUND LEVEL
82 dB(A) under normal operating conditions.
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.
CERTIFICATION
The Reelmaster 6000 series complies with American National Standards Institute (ANSI B71.4-2004) and European Community (CE) specifications with required
weight kits and ballast installed.
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
The Reelmaster 6500-D & 6700-D are manufactured
in Tomah, WI ISO 9002 Certified Plant.