Filter
Top Products
SPECIFICATIONS
Reelmaster 5500-D
Kubota
®
3-cylinder, liquid-cooled turbo diesel. 35 gross hp (26.2 kW) rated, 31.5 hp (23.6 kW) net @ 3000 RPM.
Pressurized lubrication system with 4.0 U.S. qt. (3.8 liter) capacity. Heavy-duty three-stage, radial seal air cleaner
with dust bowl and restriction indicator. Replaceable spin-on fuel filter/water separator with visible bowl. 10 gallon
(37.8 liter) diesel fuel capacity.
Mid-mounted air intake with 17" (43.1 cm) diameter, 10-blade cooling fan. Industrial tube and fin construction
radiator, 7 fins per inch, with a 7.5 quart (7.1 liter) capacity.
Front drive wheels powered via hydrostatic transmission coupled to a mechanical automotive-style drive axle. 4WD
model equipped with Toro
®
4-matic
®
on-demand, 4-wheel drive, which connects the transmission to a mechanical
rear axle by a drive shaft with an over-running clutch.
Individual left and right drum-type wheel brakes. Brakes may be actuated individually as service brakes, or together
for transport or parking brakes. Dynamic braking through hydrostatic traction drive system.
Front traction tires: 26.5 x 14-12 turf type, rear steering tires: 20 x 10-10. Forward speed range of 0-10 mph
(0-16 kph). Reverse speed of 0-4 mph (0-6.4 kph).
Single foot-operated traction pedal with adjustable traction speed control. Foot-operated service and parking
brakes. Hand-operated key ignition switch, throttle, reel speed control, cutting unit raise/lower joystick, cutting
unit PTO lever, parking brake release knob.
Hour meter, speedometer, fuel gauge, engine coolant temperature gauge, and warning light cluster: engine oil
pressure, high engine temperature, charge indicator, glow plug indicator. Safety interlock switches for parking
brake, traction pedal in neutral, PTO engagement, and operator presence in seat.
Wheel Tread: Wheel Base: Overall Length: Overall Height: Transport Width: Approx. Weight:
72" (182 cm) 62" (157 cm) 113" (287 cm) 59" (149 cm), 88" (223 cm) 2,962 lbs. (1,344 kg)
82" (208 cm) with ROPS
Complies with ANSI B71-4 - 1999 and CE requirements when equipped with necessary weights or added ballast.
Two-year limited warranty, refer to Operator’s Manual for details.
5, 7 and 11-Blade Cutting Units
22" (95 cm) wide hydraulically driven, balanced cutting units with 7" (17 cm) diameter reels. Cutting units
interchangeable to all positions. Weight transfer standard.
100" (254 cm).
3
/8"-1
3
/4" (9.5 - 32 mm) total range. Recommended use: 5-blade 1"-1
3
/4" (25.4 - 44.4 mm); 7-blade
1
/2"-1"
(12.7 - 25.4 mm); 11-blade
3
/8"-
5
/8" (9.5 - 15.8 mm).
Manually controlled, variable reel speed for control of clip frequency. Maximum reel speed of 1,650 RPM.
On-board backlapping capabilities standard.
Single point adjustment (SPA) of bedknife to reel.
3" (7 cm) diameter, deep groove Wiehle
®
front roller. 3" (7 cm) diameter full rear roller. Other roller
configurations optional.
Engine
Cooling
Traction Drive
Brakes
Tires
Controls
Gauges & Warnings
Overall Dimensions
Certification
Warranty
Type
Width of Cut
HOC Range
Clip Frequency
Backlapping
Bedknife Adjustment
Rollers
Products depicted in this brochure are for demonstration purposes only.
Actual products offered for sale may vary.
©2002 The Toro Company, 8111 Lyndale Ave. S., Bloomington, MN 55420-1196
Part No. 071-02-T. Printed in U.S.A.
www.toro.comwww.toro.com