Filter
Top Products
132
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
A Safety Reminder: Prior to any application, know the chemical content and the manufacturer’s recommendation for protective clothing. Always wear
proper clothing and mask when applying chemicals.
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
OPEN BOOM (STANDARD)
BOOM ASSEMBLY
18.5’ (5.6 m) three section, triangular truss-style open booms, expandable to 20.5' (6.3 m) with optional kit.
BOOM ACTUATORS
Heavy-duty hydraulic lift actuators with nitro-steel plated shafts; 1-3/4” (4.4 cm) Bore x 10.06” (25.6 cm) Stroke
SPRAY NOZZLES
Eleven nozzle turrets, triple turret-mount, quick-disconnect with diaphragm check valves. Twelve nozzle turrets with optional kit.
MULTI PRO 1750 ACCESSORIES
CLEANLOAD
TM
EDUCTOR
This on-board mixing station allows rapid and safe loading of any chemical without the need to first mix into a slurry. Incorporates a built-in bottle wash nozzle and
has an optional suction lance to pull in powered to liquid products from their container. Stores within the width of the spray vehicle.
FRESH WATER RINSE KIT
Simplifies and automates the triple-rinse process, saving hours and hours of clean-up time.
ELECTRIC HOSE REEL
150’ (45.7 m) of hose for hand or walk spraying applications. Convenient electric powered rewind. Spray gun has an adjustable nozzle from stream to fan.
PRO FOAM
TM
MARKING KIT
Foam dollops ensure accurate parallel path tracking. Select foam for either boom or both.
ULTRA SONIC BOOM
TM
KIT
New sonar sensors automatically maintain proper spray height over undulating turf.
COVERED BOOM KIT
Extends 12” (30.5 cm) below the boom to minimize chemical drift in breezy conditions while retaining full boom system functionality.
AIR INDUCTION TURBO TWIN
JET NOZZLES
Exclusive to Toro in the 0.8 gpm (3.02 lpm), 1.0 gpm (3.79 lpm) and 1.5 gpm (5.68 lpm) sizes, for exceptional contact coverage.
CONTACT & SYSTEMIC NOZZLES
See complete nozzle listing in the Multi Pro
®
Nozzle Selection Brochure – available for download on toro.com
MULTI PRO 1750, MODEL 41188
ENGINE
Kohler,
®
CH740 Command Series, twin-cylinder, air-cooled, 4-cycle, 27 hp (20 kW) gross.
TRACTION SYSTEM
Kanzaki / Tuff Torq 3-speed (forward). 1-speed (reverse), mechanical transaxle with differential lock.
GROUND SPEEDS
Forward: 0 – 11.5 mph (0 – 18.5 kph). Reverse: 0 – 2.5 mph (0 – 4 kph).
TIRES
Front: Kenda K404 smooth (treadless); 20x10-10. Rear: Kenda turf tread; 24x13-12.
BRAKES
Four wheel hydraulic disc, 2-piston calipers; Front: 7.5” (19 cm) diameter rotor Rear: 9.5” (24 cm) diameter rotor.
MAIN FRAME
High-strength, formed steel rear frame channels welded to steel tubular crossmembers and upper/lower steel tubular structure, ROPS standard.
SUSPENSION
Front suspension – coil over shock; Rear suspension – rigid; rubber tires.
STEERING
Fully hydraulic: steering wheel turns, lock to lock: 3.5
GAUGES/INDICATORS
Multi-function display (Mini InfoCenter
TM
), Pressure Gauge, Mechanical Fuel Gauge.
VEHICLE CONTROLS
Ignition key switch, Choke, Headlight Switch. Optional Wireless Hour Meter. Speed Lock.
SEAT
Single, high back cushion seat standard with manual position adjustment w/seatbelts.
WEIGHT
2200 lbs. (998 kg) shipping weight
DIMENSIONS
Measurements with spray system: Length = 140” (3.56 m) (w/booms folded in cradles) Width = 70” (1.78 m) (w/booms folded in cradles)
Height = 97” (2.4 m) (w/booms folded in cradles)
WARRANTY
Two-year limited warranty. Refer to Operator’s Manual for further details.
SPRAYER SPECIFICATIONS
SOLUTION TANK
High density, impact resistant polyethylene with large 16” (41cm) fill well; tapered bottom and sump with drain.
RATED CAPACITY
175 gallons (662 liters)
SPRAY PUMP
Hardi 363/5.5, 6-diaphragm positive displacement w/1” (2.5cm) input shaft; input speed 300~1150 rpm, Flow rate of 41gpm (155 lmp) @ 40psi (860 rpm).
AGITATOR
3, side-mounted jet agitation nozzles for full tank agitation.
CONTROLS
Spray pump control switch, agitator jet switch, rate switch, individual boom On/Off switches, boom actuator switches, indicator lights on pump, agitation and boom
switches, throttle lock.
Multi Pro
®
1750 Specifications
*
The Multi Pro 1750 is manufactured in
Tomah, WI ISO 9002 Certified Plant.