Toro 4040 Lawn Mower User Manual


 
GREENSMASTER FLEX 1800, MODEL 04041 GREENSMASTER FLEX 2100, MODEL 04040
ENGINE
Subaru
®
Heavy-Duty Industrial, 3.4 kW (4.5 hp), OHC, 4-cycle, CARB, EPA, EU certified gasoline engine with integral lighting coil. Displacement: 126 cc (7.7 cu
in.). Cast iron cylinder sleeve. Electronic ignition. Maximum noise suppression muffler.
FUEL CAPACITY
2.7 liters (2.85 quarts) regular grade unleaded gasoline.
TRANSMISSION
Engine powered ramp-engagement style friction clutch to the first stage of a multi-ribbed poly-V belt drive. The traction drums are belt driven through a spur
gear planetary differential with integral band style service/parking brake.
MAINTENANCE
No grease zerks, sealed bearing design reduces daily maintenance.
GROUND SPEED
Mowing speed: 2.6-5.8 km/h (1.6-3.6 mph). Transport speed (maximum): 8.7 km/h (5.4 mph).
TRACTION DRUM
Dual cast aluminum 19 cm (7.5”) diameter with taper on outer 5 cm (2”).
CONTROLS
Engine Controls: Recoil starter, choke, fuel shut-off. Handle Controls: on/off (‘ignition’) switch, hour meter, throttle, dual function traction/reel control lever,
operator presence control, service/park brake lever, on/off light switch (optional blank slot in console).
HANDLE
Loop style, molded contour upper, 2.5 cm (1”) diameter lower tube. Two angular adjustments and lift assist kickstand with 2.0 inches of telescoping adjustment.
TRANSPORT TIRES/KICKSTAND
Quick detachable 3.00/3.25 x 6 pneumatic. Kickstand standard equipment. Loop style with service position lock, 1” (2.5 cm) diameter tube.
REEL CONSTRUCTION
8-Blade Reel: 12.7 cm (5”) diameter, 8 high carbon steel blades welded to 5 steel spiders (no 8-blade, 46 cm [18”] available).
11-Blade Reel: 12.7 cm (5”) diameter, 11 high carbon steel blades welded to 5 steel spiders.
14-Blade Reel: 12.7 cm (5”) diameter, 14 high carbon steel blades welded to 5 steel spiders.
SUSPENSION
Semi-floating cutting unit separable from drive unit, pivoting around reel centerline (pitch axis) and pivoting around bedknife centerline side to side (roll axis).
WIDTH OF CUT
46 cm (18”) 53 cm (21”)
HEIGHT OF CUT
Front roller adjustable with 2 position rear roller: 1st position (spacer on top) 1.59 – 3.97 mm (1/16” - 5/32”). 2nd position (spacer below) 3.17 – 7.54 mm (1/8”
- 19/64”)
CLIP FREQUENCIES
Reel drive consists of three pulleys of different diameter. 6-clip adjustments per reel, based on pulley configuration.
REEL DRIVE
Transmission reel clutch shaft to a telescoping drive shaft with a pair of beam style couplers. Telescoping sleeve is retractable for ease of cutting unit removal.
CUTTING UNIT CONST.
Cast aluminum and machined tubular steel frame.
CUTTING UNIT ADJUST./
SERVICE
Cutting unit detachable from traction unit. Dual screw “click” adjustments to reel. Front roller height of cut adjustment. Sealed stainless steel reel bearings.
BEDKNIFE
Bedknife is high carbon through-hardened steel. EdgeMax™ Microcut Bedknife is standard on 11 & 14-blade cutting unit. EdgeMax bedknife is solid tool steel.
GRASS BASKET
Molded polyethylene with integrated graphics highlighting overlap guidelines, vented for high-efficiency collection.
ROLLERS
Front Roller: Optional – must be ordered. Rear Roller: Aluminum full roller 5 cm (2”) diameter with sealed bearings.
WORKING WEIGHT
Weight TBD 118 kg (260 lbs.) with basket, without transport tires and groomer.
CERTIFICATION
ANSI & CE
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.
* Specifications and design subject to change without notice. Products depicted in this literature
are for demonstration purposes only. Actual products offered for sale may vary in design, required
attachments and safety features. Consult your local Toro Distributor. The Greensmaster Flex 1800
& 2100 are manufactured in Tomah, WI ISO 9002 Certified Plant. Specifications subject to change.
Please contact your Toro distributor for details. ©2012 The Toro Company. All rights reserved. 8111
Lyndale Ave. S., Bloomington, MN 55420-1196. Printed in the U.S.A. GB Part No. 200-5079
GREENSMASTER eFLEX 1800 ACCESSORIES
CUTTING UNITS & REEL OPTIONS GROOMER OPTIONS
04254 14-Blade DPA Cutting Unit 04259 Flex Groomer Drive, Fwd Rotating
04253 11-Blade DPA Cutting Unit 04263 Groomer Reel, Carbide 46 cm (18")
119-4102 14-Blade Reel 04264 Grooming Brush 46 cm (18”)
119-4101 11-Blade Reel 120-9661 Groomer Quick Up Kit
STANDARD CUTTING UNIT EQUIPMENT SCRAPER OPTIONS
117-1530 EdgeMax™ Microcut Bedknife 120-9615 Narrow Wiehle Roller Scraper
BEDKNIFE & BEDBAR OPTIONS 120-9616 Wide Wiehle Roller Scraper
98-7260 Tournament Bedknife 120-9617 Full Roller Scraper
110-2301 Low Cut Bedknife 120-9621 Narrow Wiehle Roller Scraper Brush
110-2300 Extended Microcut Bedknife 120-9622 Wide Wiehle Roller Scraper Brush
98-7261 Microcut Bedknife 120-9623 Full Roller Scraper Brush
117-1532 EdgeMax™ Tournament Bedknife 120-9624 Narrow Wiehle Roller Scraper Comb
117-1530 EdgeMax™ Microcut Bedknife 120-9625 Wide Wiehle Roller Scraper Comb
120-9600 High Height of Cut Kit 120-9626 Full Roller Scraper Comb
110-2282-01 Less Aggressive Bedbar 120-9627 Scraper Kit with Rear Roller
94-9010 Height of Cut Adjustment Bar TRACTION UNIT ACCESSORIES
ROLLER OPTIONS 04265 LED Light Kit
120-9607 Front Narrow Wiehle Roller 04266 Push Broom Brush
120-9609 Front Wide Wiehle Roller 04123 Wheel Kit
120-9611
Front Full Steel Roller (6.3 cm
[2.5”] dia.)
04399 Turf Evaluator
115-7361 Front Roller Extension Kit
114-4630 Rear Roller Adjustment Kit
GREENSMASTER eFLEX 2100 ACCESSORIES
CUTTING UNITS & REEL OPTIONS ROLLER OPTIONS
04251 11-Blade DPA Cutting Unit 04255 Front Narrow Wiehle Roller
04252 14-Blade DPA Cutting Unit 04256 Front Wide Wiehle Roller
119-4105 14-Blade Reel 04257 Front Full Roller
119-4104 11-Blade Reel 04258 Long Front Narrow Wiehle Roller
119-4103 8-Blade Reel 115-7356 Rear Full Roller – Aluminum
STANDARD CUTTING UNIT EQUIPMENT 120-9595 Rear Full Roller – Steel
115-1880 EdgeMax™ Microcut Bedknife 115-7361 Front Roller Extension Kit
BEDKNIFE & BEDBAR OPTIONS 114-4630 Rear Roller Adjustment Kit
93-4263 Tournament Bedknife GROOMER OPTIONS
93-4264 Low Cut Bedknife 04259 Flex Groomer Drive, Fwd Rotating
108-4303 Extended Microcut Bedknife 04260 Flex Groomer Drive, Counter Rotating
93-4262 Microcut Bedknife 04711 Groomer Reel, Carbide (RH)
108-4302 Extended Tournament Bedknife 04712 Groomer Reel, Spring Steel (RH)
115-1881 EdgeMax™ Tournament Bedknife 04713 Grooming Brush
120-9600 High Height of Cut Kit 120-9661 Groomer Quick Up Kit
106-2648-01 Less Aggressive Bedbar SCRAPER OPTIONS
94-9010 Height of Cut Adjustment Bar 115-7374 Narrow Wiehle Roller Scraper
TRACTION UNIT ACCESSORIES 115-7375 Wide Wiehle Roller Scraper
04265 LED Light Kit 115-7376 Full Roller Scraper
04266 Push Broom Brush 115-7377 Narrow Wiehle Roller Scraper Brush
04123 Wheel Kit 115-7378 Wide Wiehle Roller Scraper Brush
04399 Turf Evaluator 115-7379 Full Roller Scraper Brush
115-7380 Narrow Wiehle Roller Scraper Comb
115-7381 Wide Wiehle Roller Scraper Comb
115-7382 Full Roller Scraper Comb
115-7383 Rear Roller Scraper