Filter
Top Products
Products depicted in this brochure are for demonstration purposes only.
Actual products offered for sale may vary.
©2003 The Toro Company, 8111 Lyndale Ave. S., Bloomington, MN 55420-1196
Part No. 03-072-T. Printed in U.S.A.
www.toro.comwww.toro.com
SPECIFICATIONS
Reelmaster
®
2000-D, Model 03428
Engine Briggs & Stratton
®
/Daihatsu
®
, 3-cylinder, liquid-cooled, OHV, diesel engine. 23 hp gross rated, 18.5 hp net @ 2950
rpm, 51.9 cu. in. (850 cc) displacement. Isolation mounted. Forced lubrication with spin-on oil filter. Mechanical
centrifugal governor. Distributor type fuel injection pump. Fuel filter/water separator with replacement filter
element. Heavy-duty remote mounted air cleaner. Side mounted industrial radiator, 7 fins per in.
Fuel Capacity 6.5 gallons (25 liters) diesel fuel.
Traction Drive Hydrostatic, closed-loop drive, variable displacement 1.24 cu. in. (19.7 cc) piston pump, infinitely variable in both
forward and reverse directions. Front mounted oil cooler and shuttle valve provide positive closed-loop cooling.
2WD model uses two high-torque hydraulic 12 cu. in. (197 cc) wheel motors. 3WD models include a third high-
torque hydraulic 12 cu. in. (197 cc) wheel motor. 3WD selector valve automatically shifts into 3WD when reels
are engaged.
Ground Speed Mowing speed: 0-5 mph (0-8 km/h). Transport speed: 0-8 mph (0-13 km/h). Reverse speed 0-3 mph (0-4.8
km/h).
Hydraulic Oil Capacity/Filter Remote mounted, 2.3 gallons (8.7 liters) oil reservoir. 10-micron remote mounted spin-on filter.
Tires/Wheels Two front traction drive tires, 20 x 10-8 tubeless, 4-ply rating. Rear steering tire and tube, 20 x 8-8, 4-ply rating.
Main Frame Frame consists of formed steel, welded steel and steel tubing components.
Brakes Service braking accomplished through dynamic characteristics of hydrostat. Parking brake is actuated by ratchet
hand lever.
Steering Pinion and sector gear with solid drag link to rear steer wheel arm.
Controls Single foot operated traction pedal for forward and reverse and adjustable traction pedal stop. Hand operated
throttle, starter switch, reel engagement switch, cutting unit lift lever, parking brake and seat adjustment.
Gauges & Protection Systems Hour meter, 4-light warning cluster gauge: oil pressure, water temperature, amps and glow plug. High coolant
temperature shutdown. Engine pre-heat incorporated into starter switch. Reel engage indicator light.
Electrical Features 12 volt, group 55, 585 cold cranking amps at 0° F (-18° C), 95 minute reserve capacity at 80° F (27° C). Standard
control module provides machine electrical diagnostics. 40 amp alternator with regulator/rectifier. Seat switch,
PTO, parking brake, and traction interlock switches.
Overall Dimensions Wheel tread width: 54.5" (138 cm). Wheelbase: 55" (140 cm). Overall length (includes out front hoses):
96" (244 cm). Overall width: RM2000-D with 27" (68.6 cm) cutting units: 76.5" (194 cm), with 32" (81 cm)
cutting units: 89.5" (227 cm). Transport width: RM2000-D with 27" (68.6 cm) cutting units: 72" (183 cm), with
32" (81 cm) cutting units: 85" (216 cm). Overall height (top of steering wheel): 44" (112 cm).
Certification The Reelmaster 2000-D complies with the American National Standards Institute (ANSI B71.4 - 1999) and
European Community (CE) specifications with required ballast installed.
Warranty Two-year limited warranty, refer to Operator’s Manual for details.
Cutting Units
Type Three hydraulically driven, balanced, 7" (17.8 cm) diameter reels. Cutting units interchangeable to all
three positions.
Reel Blade Options 5, 8, and 11-blade reels available for 27" (68.6 cm) cutting unit. 5 and 8-blade reels available for 32" (81 cm)
cutting unit.
HOC Range Height of cut ranges
1
/4"-1
3
/4" (.6-4.4 cm) standard in floating position,
1
/2"-2
5
/8" (1.2-7 cm) in fixed position.
Maximum 3" (7.6 cm) height of cut (approximate) in floating position when configured with heavy duty Wiehle
®
roller and optional front roller brackets.
Cutting Width 72" (183 cm), or 85" (216 cm) width of cut dependent on cutting unit selection.
Clip Frequency/Backlapping Manually controlled variable reel speed for adjustment of clip frequency. Standard on-board backlapping.
Bedknife-to-Reel Adjustment Single point adjustment (SPA) of bedknife to reel.
Rollers Full roller standard on rear of cutting unit. Front roller options: full, Wiehle
®
, sectional, or anti-scalp
(for fixed position cutting units).
Reelmaster
®
2000-D, Model 03428
Engine Briggs & Stratton
®
/Daihatsu
®
, 3-cylinder, liquid-cooled, OHV, diesel engine. 23 hp gross rated, 18.5 hp net @ 2950
rpm, 51.9 cu. in. (850 cc) displacement. Isolation mounted. Forced lubrication with spin-on oil filter. Mechanical
centrifugal governor. Distributor type fuel injection pump. Fuel filter/water separator with replacement filter
element. Heavy-duty remote mounted air cleaner. Side mounted industrial radiator, 7 fins per in.
Fuel Capacity 6.5 gallons (25 liters) diesel fuel.
Traction Drive Hydrostatic, closed-loop drive, variable displacement 1.24 cu. in. (19.7 cc) piston pump, infinitely variable in both
forward and reverse directions. Front mounted oil cooler and shuttle valve provide positive closed-loop cooling.
2WD model uses two high-torque hydraulic 12 cu. in. (197 cc) wheel motors. 3WD models include a third high-
torque hydraulic 12 cu. in. (197 cc) wheel motor. 3WD selector valve automatically shifts into 3WD when reels
are engaged.
Ground Speed Mowing speed: 0-5 mph (0-8 km/h). Transport speed: 0-8 mph (0-13 km/h). Reverse speed 0-3 mph (0-4.8
km/h).
Hydraulic Oil Capacity/Filter Remote mounted, 2.3 gallons (8.7 liters) oil reservoir. 10-micron remote mounted spin-on filter.
Tires/Wheels Two front traction drive tires, 20 x 10-8 tubeless, 4-ply rating. Rear steering tire and tube, 20 x 8-8, 4-ply rating.
Main Frame Frame consists of formed steel, welded steel and steel tubing components.
Brakes Service braking accomplished through dynamic characteristics of hydrostat. Parking brake is actuated by ratchet
hand lever.
Steering Pinion and sector gear with solid drag link to rear steer wheel arm.
Controls Single foot operated traction pedal for forward and reverse and adjustable traction pedal stop. Hand operated
throttle, starter switch, reel engagement switch, cutting unit lift lever, parking brake and seat adjustment.
Gauges & Protection Systems Hour meter, 4-light warning cluster gauge: oil pressure, water temperature, amps and glow plug. High coolant
temperature shutdown. Engine pre-heat incorporated into starter switch. Reel engage indicator light.
Electrical Features 12 volt, group 55, 585 cold cranking amps at 0° F (-18° C), 95 minute reserve capacity at 80° F (27° C). Standard
control module provides machine electrical diagnostics. 40 amp alternator with regulator/rectifier. Seat switch,
PTO, parking brake, and traction interlock switches.
Overall Dimensions Wheel tread width: 54.5" (138 cm). Wheelbase: 55" (140 cm). Overall length (includes out front hoses):
96" (244 cm). Overall width: RM2000-D with 27" (68.6 cm) cutting units: 76.5" (194 cm), with 32" (81 cm)
cutting units: 89.5" (227 cm). Transport width: RM2000-D with 27" (68.6 cm) cutting units: 72" (183 cm), with
32" (81 cm) cutting units: 85" (216 cm). Overall height (top of steering wheel): 44" (112 cm).
Certification The Reelmaster 2000-D complies with the American National Standards Institute (ANSI B71.4 - 1999) and
European Community (CE) specifications with required ballast installed.
Warranty Two-year limited warranty, refer to Operator’s Manual for details.
Cutting Units
Type Three hydraulically driven, balanced, 7" (17.8 cm) diameter reels. Cutting units interchangeable to all
three positions.
Reel Blade Options 5, 8, and 11-blade reels available for 27" (68.6 cm) cutting unit. 5 and 8-blade reels available for 32" (81 cm)
cutting unit.
HOC Range Height of cut ranges
1
/4"-1
3
/4" (.6-4.4 cm) standard in floating position,
1
/2"-2
5
/8" (1.2-7 cm) in fixed position.
Maximum 3" (7.6 cm) height of cut (approximate) in floating position when configured with heavy duty Wiehle
®
roller and optional front roller brackets.
Cutting Width 72" (183 cm), or 85" (216 cm) width of cut dependent on cutting unit selection.
Clip Frequency/Backlapping Manually controlled variable reel speed for adjustment of clip frequency. Standard on-board backlapping.
Bedknife-to-Reel Adjustment Single point adjustment (SPA) of bedknife to reel.
Rollers Full roller standard on rear of cutting unit. Front roller options: full, Wiehle
®
, sectional, or anti-scalp
(for fixed position cutting units).