Filter
Top Products
OPERATION
OPERATION
Operation Section 4-33
© 2006 Alamo Group Inc.
FLX15/10 04/06
Stay alert and watch for trees, powerlines, posts, signs,
and all other overhead and ground obstructions while
you are mowing. Use extreme care to avoid hitting
these types of obstructions.
To avoid most obstacles, use the cylinder to steer the
cutter. The FLX15 can swing the cutter 87” using the
cylinder. The FLX10 gives 75”. The tractor may be
needed to maneuver around larger obstacles.
WARNING!
Do not let the Blades turn when the Mower Deck is raised for
any reason, including clearance or for turning. Raising the
Mower deck exposes the Cutting Blades which creates a
potentially serious hazard and could cause serious injury or
even death from objects thrown from the Blades. (SRM-7)
When mowing across uneven areas such as road shoulders, ditch edges, and other uneven terrain, position
mower so that one support wheel is near the highest point to prevent blades from cutting into gravel or dirt
which can cause rapid blade wear and extremely severe shock loads on the drivetrain resulting in rapid wear
or damage to these components. Blades contacting the ground may cause objects to be thrown out from under
the mower deck. Always avoid operating the mower at a height or position which may cause the blades to contact
the ground. Cutting into the berm or edge of the ditch will cause abnormal and accelerated blade wear and
possible blade component failure.
Correct Mower Deck Positioning
Wrong Mower Deck Positioning