Filter
Top Products
4
Specifications are subject to modification without prior notice
calibration software LCL30
(See separate leaflet)
This software enables the user to define
automatic calibration procedures.
It provides control of generated or simulat-
ed temperatures and will measure the dif-
ference between the standard thermometer
and the sensor being calibrated
This software allows:
• to program the calibration procedure.
• to select a standard sensor from a list
which will be used as reference; this list is
updated by the user.
• to control the thermal reference source.
• to collect the measurements.
• to print and save calibration reports for
all the sensors.
It also enables the user to document and
recall the history of calibrated sensors.
accessories
• Standard sensor AN 5847 and "work-
ing" standard sensor AN 5848 are
offered with various connections: plug,
DIN socket or LEMO socket.
• LEMO-DIN adapter for connection to the
probe equipped with DIN socket
(PEM 40316).
• T 1200 sensor, standard thermocouple
connectable by using plugs.
• Cable, 2-meter length (ACL 4603) with
LEMO socket at one end and RTD free
sensor connection at the other end.
ordering instructions
High accuracy thermometer PHP 601-1
High accuracy thermometer with battery pack and charger PHP 601-2
High accuracy thermometer with IEEE 488.2 interface PHP 601-3
High accuracy thermometer with battery pack, charger
and IEEE 488.2 interface PHP 601-4
Accessories ..................................................................................
Carrying case AN 6901
Right-angle brackets for panel mounting AN 5883
Rack mounting kit AN 5884
RS 232 cable, 9-pin male/9-pin female AN 5875
IEEE 488 cable, 2-meter AN 5836
LEMO socket to be wired ER 48379
Cable, 2-meter, LEMO/free ACL 4603
Pt 100 standard sensor with plugs AN 5847B
LEMO Pt 100 standard sensor AN 5847C
Pt 100 reference sensor with plugs AN 5848-20000A
LEMO Pt 100 reference sensor AN 5848-30000A
LEMO Pt 100 reference sensor AN 5848-30001A
Standard thermocouple T 1200
LEMO-DIN adapter PEM 40316
Automatic calibration software LCL 30
B.P. 182 - F 91006 EVRY Cedex
Tel. 33 1 69 36 50 60
Fax 33 1 60 77 82 97
Email: export@aoip.com