Filter
Top Products
To Power your WeatherGuide™
YourWeatherGuide™ is powered by 2AAA batteries (not included).
Remove the batteries compartment cover located on the back of the
unit.Install 2AAA batteries.Replace the battery compartment cover.
How to Display your WeatherGuide™
Place the unit indoors in a well-ventilated location away from direct
sunlight.
Table top – use theTable Stand on the back of the unit.
Wall – use the keyhole on the back of the unit, located between the
buttons and the battery compartment.
How to read your WeatherGuide™
Temperature Readings
Temperatures display on the LCD screen.
Indoor temperature readings – these are temperatures at the
thermometer’s location.
Outdoor temperature readings – these are temperatures that can
be measured by the attached sensor probe.Open a window and run
the cable through the opening so that the sensor probe is exposed to
the outdoor temperature.Gently close the window to avoid crimping
or severing the cable.
Alternately,the probe may be used to measure temperatures of aquar-
iums, swimming pools,hot tubs,etc.Simply allow the end of the probe
to hang where you wish to measure temperatures.
To Switch Between Indoor and Outdoor Temperature
Displays
Press the “IN/OUT” button located on the back of the unit to switch
between indoor and outdoor temperature displays.
An“IN” icon appears when indoor temperature is on the screen.
An“OUT” icon appears when outdoor temperature is on the screen.
2