Taylor 1506 Weather Radio User Manual


 
11
The color graphs are designed as an intuitive way to gauge the
weather at a glance. The left color bar graph represents the respective
Indoor/Outdoor temperature, heat index or dew point of the current
display mode. The right graph represents the respective
Indoor/Outdoor humidity. As the measurements change, the number
of illuminated bars changes automatically.
Color Bar Graphs
Trouble-Shooting
Disconnected Signals
If the receiver unit does not receive a transmission from a remote unit
channel for 1 hour, the display will show dashes. To correct this
problem:
1. Go to the remote location of that channel to check that the unit is
properly positioned, within the appropriate transmission range.
2. If new batteries are faulty on the initial installation, install fresh
batteries. If you did not notice the Low Battery icon warning and
the product performed correctly after initial set up, the batteries
have lost their charge. Replace batteries (see the Power Sources
section of this manual.)
3. Check to make sure the transmission path is clear of obstacles
and interference.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
Modifications not authorized by the manufacturer may void users
authority to operate this device.