Setup
ForSonarcompatibility,theFW1082comeswithacontrolsurfacepluginthatis
compatiblewith Sonar3.1b &higheron WindowsXP/SP1&higher.
Install thepluginfromtheCDROM.
OpentheFW1082controlpanelandselectNativeModefromtheControlProtocoldrop
downmenuundertheSettingstab.
Next, opentheControlSurfaceswindowundertheOptionsmenuin Sonar,addanew
surfacebyclickingtheyellowstar,selecttheFW1082ControlSurfacethen assignitto
FW1082Control. ClickOK.