www.tanaka-usa.com 7 custsvc@tanaka-ism.com
Owner’s Manual
TBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PFD
TBC
-
270P
N
/
PND,TBC
-
300/SDH/3010,TBC
-
340/D
,TBC
-
340PF/D
When using a trimmer head (Fig.1-9B) with two-piece type blade guard, attach
the guard extension to the blade guard. (Fig. 1-9)
Then locate the guard above the angle transmission. (Fig. 1-9B)
NOTE!
If your unit has guard location label on drive shaft tube, follow the
indication.
NOTE!
To remove the guard extension, refer to the drawings. Wear gloves as the
extension has a sharp line limiter, then push the four square tabs on the guard
one by one in order. (Fig. 1 -9C)