Filter
Top Products
Do not operate your splitter in poor mechanical condition or when needing repair. Repair and
replace worn or broken parts immediately.
Periodically tighten nuts, bolts, and hydraulic fittings.
The hydraulic system of your log splitter requires careful inspection, along with the mechanical
parts. Be sure to replace frayed, kinked, or otherwise damaged hydraulic components.
The pressure relief valve on the splitter is preset at the factory. Do not adjust valve. Only a
qualified service technician should perform this adjustment.
If the wedge becomes dull or nicked, it can be removed and sharpened. The wedge is heavy and
may still have sharp edges, wear gloves while handling the wedge.
REPAIR PARTS
Your Swisher Log Splitter has been produced with components designed specifically to this
machine. Although standard springs, hardware, etc. may look similar to parts used on other
machinery, they may in some cases be made of a different construction and/or materials.
9