Filter
Top Products
54
ENGLISH
GB GB
cutting deck or before unclogging the chute;
– before checking, cleaning or working on
lawnmower;
– after striking a foreign object. Inspect the
lawnmower for damage and make repairs
before restarting and operating the lawnmower;
– if the lawnmower starts to vibrate abnormal-
ly, find and remove the cause of the vibration
immediately;
– whenever you leave the lawnmower unat-
tended.
– when transporting the equipment.
19) Stop the engine:
– every time you remove or replace the grass-
catcher.
– before adjusting the grass cutting height.
20) When mowing, always keep to a safe dis-
tance from the rotating blade. This distance is
the length of the handle.
1) Keep all nuts, bolts and screws tight to be
sure the equipment is in safe working condition.
Regular maintenance is essential for safety and
performance.
2) To reduce the fire hazard, keep the lawnmow-
er, especially the engine, free of grass, leaves,
or excessive grease. Do not leave containers
with grass cuttings in rooms.
3) Check the stone-guard and grass-catcher
frequently for wear and deterioration.
4) Periodically check the electric cables and
replace them if they are damaged or if the insu-
lation has been damaged. Never touch a badly
insulated cable if it still connected to the power
supply. Remove the cable from the socket
before taking any action.
5) Wear strong work gloves when removing and
reassembling the blade.
6) Check the blade’s balance after sharpening.
D) MAINTENANCE AND STORAGE
SERVICE
ACCESSORIES/SPARE PARTS
Always use genuine spare parts and
accessories. Non-genuine spare parts
and accessories have not been
checked and approved by the lawn-
mower manufacturer. Use of non-gen-
uine spare parts and accessories can
lead to the risk of injury even if they fit
the machine. The lawnmower manufac-
turer does not accept any liability for
injuries caused by the use of such parts
or accessories.
Genuine spare parts are stocked by authorised
service centres and by many dealers.
We recommend that you take the machine to an
authorised service centre for annual servicing,
maintenance and inspection of safety equipment.
For servicing and spare parts contact your distrib-
utor.
PRODUCT IDENTITY
The identity of the product is determined by the
article and serial numbers of the machine.
These can be found on the label fixed to the chas-
sis of the machine:
Use this identification whenever you contact a
service centre or buy replacement parts.
After buying the machine, write the above numbers
on the back page of this booklet as soon as possi-
ble.
The manufacturer reserves the right to make
changes to the product without prior notice.
THE ENVIRONMENT
In order to protect the environment, we recom-
mend that the following points should be given
special consideration:
• Do not dispose of used lead-acid batteries in a
garbage bin. Take them to a battery collection
point for recycling (applies to battery-powered
machines and machines with battery start).
• When, after many years of service, your
machine needs to be replaced or is no longer
required, we recommend that the machine is
returned to your distributor for recycling.
ART. NR
➔
SERIE NR.
CG rsb STIGA-71503804/0 22-12-2003 11:28 Pagina 54