Sterling Plumbing 72230106 Outdoor Shower User Manual


  Open as PDF
of 2
 
Technical Information
Model Door maximum
width
Door maximum
height
72230106 56-5/8″ (143.8 cm) 70-1/2″ (179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for roofing nail
installation.
Attach grab bars at the specified backer board locations only.
42"
(106.7 cm)
Grab Bar
1-3/8" (3.5 cm)
at Midpoint
35-1/4"
(89.5 cm)
72-1/2"
(184.2 cm)
1-1/4"
(3.2 cm)
77"
(195.6 cm)
5-1/2"
(14 cm)
4-1/2"
(11.4 cm)
35-1/4"
(89.5 cm)
10" (25.4 cm)
4" (10.2 cm)
8"
(20.3 cm)
26"
(66 cm)
16"
(40.6 cm)
21"
(53.3 cm)
15-13/16"
(40.2 cm)
3-5/16"
(8.4 cm) OD
Drain Hole
4-1/2"
(11.4 cm) D.
Drain Cutout
Recommended Roofing
Nail Locations (4 total)
14"
(35.6 cm)
1"
(2.5 cm)
46"
(116.8 cm)
22" (55.9 cm)
2" (5.1 cm)
3"
(7.6 cm)
Note: Right and left end walls are the same, only mirrored.
60"
(152.4 cm)
42" (106.7 cm) Min
42-1/8" (107 cm) Max
13"
(33 cm)
13"
(33 cm)
1"
(2.5 cm)
Backer board locations
3"
(7.6 cm)
End WallBack Wall
3-1/2" (55.9 cm)
18" (45.7 cm) Grab Bar
42" (106.7 cm) Grab Bar
Product Diagram
ENSEMBLETM
ENSEMBLETM 60″ (152.4 cm) SHOWER RECEPTOR AND WALL SURROUND WITH BACKER BOARDS
Page2of2
1064361-4-
A
 previous