Sterling Plumbing 72220106 Outdoor Shower User Manual


  Open as PDF
of 2
 
Technical Information
Model Door maximum
width
Door maximum
height
72220106 44-5/8″ (113.3 cm) 70-1/2″ (179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for roofing nail
installation.
Attach grab bars at the specified backer board locations only.
Backer board locations
1-5/8" (4.1 cm)
at Midpoint
35-1/4"
(89.5 cm)
72-1/2"
(184.2 cm)
77"
(195.6 cm)
1-1/4"
(3.2 cm)
5-1/2"
(14 cm)
4-1/2"
(11.4 cm)
35-1/4"
(89.5 cm)
10" (25.4 cm)
4" (10.2 cm)
8"
(20.3 cm)
26"
(66 cm)
16" (40.6 cm)
21"
(53.3 cm)
15-13/16"
(40.2 cm)
3-5/16"
(8.4 cm) OD
Drain Hole
4-1/2"
(11.4 cm)
D. Drain
Cutout
Recommended Roofing
Nail Locations (4 total)
3" (7.6 cm)
14"
(35.6 cm)
1"
(2.5 cm)
46"
(116.8 cm)
3-1/2"
(55.9 cm)
22" (55.9 cm)
22" (55.9 cm)
1" (2.5 cm)
1" (2.5 cm)
3"
(7.6 cm)
Back Wall
End Wall
48"
(121.9 cm)
48" (121.9 cm) Min
48-1/8" (122.2 cm) Max
Note: Right and left end walls are the same, only mirrored.
36"
(91.4 cm)
Grab Bar
18" (45.7 cm) Grab Bar
48" (121.9 cm) Grab Bar
Product Diagram
ENSEMBLETM
ENSEMBLETM 48″ (121.9 cm) SHOWER RECEPTOR AND WALL SURROUND WITH BACKER BOARDS
Page2of2
1064360-4-
A
 previous