Sterling Plumbing 72120106 Outdoor Shower User Manual


  Open as PDF
of 2
 
Technical Information
Model Door maximum
width
Door maximum
height
72120106 44-5/8″ (113.3 cm) 70-1/2″ (179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
Attach grab bars at the specified backer board locations only.
Note: Right and left end walls are the same, only mirrored.
Backer board locations
1"
(2.5 cm)
1"
(2.5 cm)
10"
(25.4 cm)
3.5" (8.9 cm)
10" (25.4 cm)
2" (5.1 cm)
2" (5.1 cm)
2"
(5.1 cm)
2" (5.1 cm)
Front Wall End Wall
16" (40.6 cm)
48" (121.9 cm) Min
48-1/8" (122.2 cm) Max
35-1/4"
(89.5 cm)
10" (25.4 cm)
4" (10.2 cm)
8"
(20.3 cm)
26"
(66 cm)
24"
(61 cm)
15-13/16"
(40.2 cm)
3-5/16"
(8.4 cm)
Max OD
Drain Hole
4-1/2" (11.4 cm) D.
Drain Cutout
Recommended Roofing
Nail Locations (4 total)
1-5/8" (4.1 cm)
at Midpoint
35-1/4"
(89.5 cm)
48"
(121.9 cm)
1-1/4"
(3.2 cm)
72-1/2"
(184.2 cm)
5-1/2"
(14 cm)
77"
(195.6 cm)
4-1/2"
(11.4 cm)
18" (45.7 cm) Grab Bar
18" (30.5 cm)
or 24" (61 cm)
Grab Bar
12"
(30.5 cm)
Grab Bar
Product Diagram
ENSEMBLETM
ENSEMBLETM 48″ (121.9 cm) SHOWER SYSTEM WITH BACKER BOARDS
Page2of2
1065812-4-
A
 previous