Sterling Plumbing 72040106 Outdoor Shower User Manual


  Open as PDF
of 2
 
Technical Information
Model Door maximum
width
Door maximum
height
72040106 15-7/8″ (40.3 cm) x
27-3/8″ (69.5 cm) x
15-7/8″ (40.3 cm)
74″ (188 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for roofing nail
installation.
Attach grab bars at the specified backer board locations only.
17-7/16"
(44.3 cm)
17-7/16"
(44.3 cm)
40-1/4"
(102.2 cm)
40-1/4" (102.2 cm)
14"
(35.6 cm)
14"
(35.6 cm)
12"
(30.5 cm)
12" (30.5 cm)
2" (5.1 cm) Drain Hole
8" (20.3 cm)
8" (20.3 cm)
31" (78.7 cm)
1-1/4" (3.2 cm)
27-3/8"
(69.5 cm)
39"
(99.1 cm)
4-7/8"
(12.4 cm)
40-1/4"
(102.2 cm)
80-3/8"
(204.2 cm)
Recommended Roofing
Nail Locations (4 total)
74-1/4"
(188 cm)
5-1/2" (14 cm) D.
Drain Cutout
Backer board locations
Left End Wall
22" (55.9 cm)
1" (2.5 cm)
below Grout
Line
10" (25.4 cm)
3.5" (8.9 cm)
18" (45.7 cm)
3" (7.6 cm)
from Corner
Note: Right end wall is the same as left end wall, only mirrored.
18"
(45.7 cm)
Grab Bar
24" (61 cm)
Grab Bar
Product Diagram
INTRIGUETM
INTRIGUETM 39″ (99.1 cm) NEO-ANGLE SHOWER RECEPTOR AND WALL SURROUND WITH BACKER BOARDS
Page2of2
1065818-4-
A
 previous