Sterling Plumbing 71124106 Outdoor Shower User Manual


  Open as PDF
of 2
 
Technical Information
Model Door maximum
width
Door maximum
height
71124106 57-11/16″ (146.5 cm) 55-1/2″ (141 cm)
Installation Notes
Install this product according to the installation guide.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Attach grab bars at the specified backer board locations only.
2"
(5.1 cm)
75-1/4"
(191.1 cm)
46" (116.8 cm)
1-1/4" (3.2 cm)
33-1/4"
(84.5 cm)
3-1/2"
(8.9 cm)
22-1/2"
(57.2 cm)
30" (76.2 cm)
33-1/4"
(84.5 cm)
15-1/2"
(39.4 cm)
8-1/2"
(21.6 cm)
8-1/2"
(21.6 cm)
8"
(20.3 cm)
14" (35.6 cm)
2" (5.1 cm) D. Drain
2" (5.1 cm)
60" (152.4 cm) Min
60-1/8" (152.7 cm) Max
21"
(53.3 cm)
60"
(152.4 cm)
54"
(137.2 cm)
18"
(45.7 cm)
4" (10.2 cm)
Back Wall End Wall
Dimensions Taken From
Center of Grout Lines
1" (2.5 cm)
1" (2.5 cm)
1" (2.5 cm)
16" (40.6 cm)
6" (15.2 cm)
(Typical)
Recommended Support
Clip Location (5 total)
20" (50.8 cm)
1"
(2.5 cm)
Attachment Block Locations
(Typically 1" (2.5 cm) Inside Grout Lines)
Backer board locations
Note: Right and left end walls are
the same, only mirrored.
42"
(106.7 cm)
Grab Bar
18" (45.7 cm) -
30" (76.2 cm)
Grab Bar
12" (30.5 cm) -
18" (45.7 cm)
Grab Bar
Product Diagram
ENSEMBLETM
ENSEMBLETM WALL SURROUND WITH BACKER BOARDS
Page2of2
1061193-4-
A
 previous