Filter
Top Products
Technical Information
Fixture:* basin area top area
Bathing well 21″ (53.3 cm) x
39″ (99.1 cm)
24″ (61 cm) x
53″ (134.6 cm)
water depth capacity
To overflow 10-1/4″ (26 cm) 35 gal (132.5 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
71040116
71040118
71040126
71040128
71040116
71040126
56-3/4″
(144.1 cm)
59-1/2″
(151.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
Attach grab bars at the specified backer board locations only.
1" (2.5 cm)
1"
(2.5 cm)
1-1/2"
(3.8 cm)
3"
(7.6 cm)
10" (25.4 cm)
1" (2.5 cm)
3-1/2"
(8.9 cm)
22"
(55.9 cm)
22" (55.9 cm)
6" (15.2 cm)
Back Wall
End Wall
3-1/2"
(8.9 cm)
3-1/2"
(8.9 cm)
24" (61 cm) or
36" (91.4 cm)
Grab Bar
12" (30.5 cm) or
18" (45.7 cm)
Grab Bar
18"
(45.7 cm)
Grab Bar
18" (45.7 cm)
Grab Bar
4"
(10.2 cm)
10"
(25.4 cm)
10"
(25.4 cm)
30" (76.2 cm)
60" (152.4 cm)
76-1/2"
(194.3 cm)
30"
(76.2 cm)
3-1/2"
(8.9 cm)
16-1/4"
(41.3 cm)
60" (152.4 cm) Min
60-1/8" (152.7 cm) Max
3-1/2"
(8.9 cm)
2" (5.1 cm)
D. Drain
Drain Cutout
9-1/8"
(23.2 cm)
8"
(20.3 cm)
21"
(53.3 cm)
5-1/2"
(14 cm)
14"
(35.6 cm)
6"
(15.2 cm)
14" (35.6 cm)
15"
(38.1 cm)
15"
(38.1 cm)
4"
(10.2 cm)
Recommended Support Clip or
Roofing Nail Location (5 Total)
Backer board locations
Note: Right and left end walls are
the same, only mirrored.
1" (2.5 cm)
30" (76.2 cm)
29" (73.7 cm)
1-5/8" (4.1 cm)
3" (7.6 cm)
Overflow Detail
PERFORMATM
PERFORMATM 60″ (152.4 cm) BATH/SHOWER SYSTEM WITH BACKER BOARDS
Page2of2
1065807-4-
A