Filter
Top Products
10. Install the Bumpers and Screw Covers
Install the Center Jamb Bumper
Runa#8x3/8″self drilling screw through a bumper insert.
Insert a screw into the pre-drilled hole in the center jamb and tighten.
Place a bumper on each bumper insert in the vertical position.
Rotate the bumper so the Sterling logo is upright.
Install the Screw Covers
Install a screw cover over each of the eight exposed screw heads on the wall jamb and column
assembly.
Screw
Cover
Inside of
Bath
Bumper
Insert
Wall
Jamb
Screw
Outside
of Bath
Bottom Track
Top
Track
#8 x 3/8" Self-Drilling
Screw
Screw
1035946-2-B 10 Sterling