Filter
Top Products
To prevent engine damage the engine is shipped without oil or
petrol. The engine must be filled with the correct grade of oil and
petrol before starting the engine.
Always use high quality detergent oil classified SAE 30 oil. Never use
additives with recommended oil.
To prolong the life of your engine it is important that the oil is changed
after the first 5 hours of use - refer to ‘Maintenance Schedule’.
Clean around the oil filler cap before removing. With the mower on a
level surface, unscrew and remove the oil filler - dipstick. Wipe oil
from it with a clean cloth. Screw the oil filler - dipstick back in place,
then unscrew and remove it to check the oil level.
The oil level is correct when it is at the full mark on the dipstick.
DO NOT OVERFILL.
Always use clean, fresh unleaded petrol. Purchase fuel in quantities
that can be used within 30 days. Never mix oil with petrol. For added
engine protection Briggs & Stratton recommend the use of their fuel
additive which is available from an authorised Briggs & Stratton serv-
ice dealer.
Fill to base of neck to allow for fuel expansion. Do not overfill the
fuel tank.
1.13
Prevent Engine Damage
BEFORE STARTING THE
MOWER
O
I
L
ADD
FULL
V15C
0.15
Litres
Oil Type
Check Oil Level
Fuel Type
111-0436 (A) 27/10/05 12:57 pm Page 1.13