Filter
Top Products
Blade maintenance
Always clean the cutting blades after operation and lubricate.
During longer cutting jobs, we recommend periodically
lubricating the cutting blade.
NOTE: We recommend a SAE-30 oil for lubricant.
Use a light coat.
Changing the blade
m CAUTION!
Wear gloves when changing the blade. Always handle the
blade by the safety ears (see Fig. C). Follow these easy
steps:
Removing
A
Push the drive cover release button (K) and slide the cover
(5) towards the ON/OFF trigger switch (4).
B
Lift the cover away from the housing.
C
Lift the blade out by the Safety Ears.
Fitting
D
Position the blades as shown aligning the holes in the
blade onto the drive pins. Verify that the rear part of the blade
is tucked under the rear housing tabs (6). This will ensure a
perfect alignment.
PLEASE NOTE: When changing from Grass Shear blade to
Shrubber blade and back, please follow these TIPS:
7
B
Safety Ears
C
D
Main Drive
Pin Hole
Housing
Tabs
Main
Drive Pin
6
5
A
4
K