Filter
Top Products
37
DECK LIFT SYSTEM
ITEM PART NO. DESCRIPTION
1 1-4354 WASHER, 29/32” I.D. x 1-1/4” O.D.
2 1-5020 RING, 7/8” External Retaining
3 3-4453 WASHER, 25/32” x 1-1/2” Flat (ZM Series 0 Models Only) (2)
4 4-3801 BRACKET, Deck Height Quadrant
5 4-3803 BRACKET, Deck Support (4)
6 4-3819 PLATE, Rear Link (4.95” long) (2) (ZM Series 0 Models Only)
-- 7-2422 PLATE, Rear Link (4.33” long) (2) (ZMT, MZM & ZM Series 1 & 2 Models)
7 4-3823 WELDMENT, Lift Handle Link
8 4-3827 LIFT, Front Deck (ZM Series 0 Models Only)
8A 5-8741 LIFT, Front Deck (ZMT, MZM & ZM Series 1 Models)
9A 4-6404 WELDMENT, Shaft Deck Lift (ZM Series 0 Models Only)
9B 5-8225 WELDMENT, Shaft Deck Lift (ZMT, MZM & ZM Series 1 & 2 Models)
10 7-3196 PLATE, Front Link (5.45” long) (2) (ZM Series 0, 1 & 2 & ZMT Models)
-- 7-3197 PLATE, Front Link (5.20” long) (2) (MZM Model Only)
11A 4-4859 SWIVEL, Spring Anchor (ZM Series 0 Models Only) (2)
11B 4-6412 BRACKET, Spring Adjustment (2) (ZMT, MZM & ZM Series 1 & 2 Models)
12 4-4860 EYEBOLT, 5/16-18 x 3” (2)
13 7-2225 SPRING, Extension Lift Assist (2)
14 4-4870 PLATE, Shim (6)
15 1-5019 PLUG, Rod
16 5-4543 ASSEMBLY, Pivot Plate (Includes 4-3804 Weldment, 1-3864 Lube Fitting
and two 1-8289 Sleeve Bearings)
17 4-4857 WELDMENT, Timing Rod
18 9-0820 NUT, 3/4-16 Hex Jam Lock (used on ZM Series 0 Only) (2)
19 9-1194 WASHER, 17/32” x 1-1/2”
20 9-0188 WASHER, 11/32” x 11/16” Flat (8)
21 9-1298 NUT, 5/16-18 Hex Nylon Insert (8)
22 9-1299 NUT, 3/8-16 Hex (7)
23 9-0122 WASHER, 3/8” Flat (4)
24 9-1587 WASHER, 17/32” x 1-1/16” (8)
25 9-1612 BOLT, 5/16-18 x 1-1/2” Carriage Grade 5 (4)
26 9-1640 BOLT, 3/8-16 x 1” Carriage (5)
27 9-1714 BOLT, 5/16-18 x 1-1/2” Carriage Grade 5 (4)
28 9-1809 PIN, 1/8” x 1-1/4” Cotter (3)
29 9-1894 NUT, 1/2-13 Hex Center Lock Grade 5 (3)
30 4-4833 ROD, Lift Lever
31 1-9363 GRIP, Lift Lever Handle
32 1-4361 CAP, Lift Rod
33 1-4432 SPRING
34 4-3833 WELDMENT, Deck Lift Lever
35 1-4437 PIN, 1/4” x 2-1/4” Groove
36 4-4858 SWIVEL, Timing Rod
37 9-1947 PIN, 1/8 x 1/2” Hair (used on ZM Series 0 Only) (4)
38 9-2017 BOLT, 1/2-20 Shoulder (ZMT, ZM & MZM Series 1 & 2 Models) (4)
39 9-0559 NUT, 1/2-20 Hex Jam (ZMT & ZM Series 1 Models) (2)
40 9-1508 BOLT, 5/16-18 x 3/4” Carriage, Gr. 5 (ZMT & ZM Series 1 & 2 Models) (6)
41 9-0393 NUT, 1/2-20 Hex Nyloc (4)
MID MOUNT Z-RIDER MANUAL No. 06110