6
Section 1 - FAMILIARIZATION
FIGURE 1.1
1.1 INTRODUCTION
This manual has been prepared for the operator’s of the
SNAPPER SCRAMBLER. Its purpose, aside from
recommending standard operating procedures and routine
service requirements, is to promote SAFETY through the
use of accepted operating practices. Read, Understand
and Follow the IMPORTANT SAFETY INSTRUCTIONS
on Pages 2 - 4 of this manual and All SAFETY messages
on the SCRAMBLER and its attachments before operating.
SNAPPER recommends returning the SCRAMBLER to an
authorized SNAPPER dealer annually for inspection and
addition of any new devices, which might upgrade the
safety of the mower.
1.2 NOMENCLATURE
The nomenclature drawing above, Figure 1.1, shows the
essential parts of the SNAPPER SCRAMBLER. It is
recommended that all operators of this equipment
become thoroughly familiar with the controls,
components, and operation of this machine before
operating. Specific details involving the engine are
found in the separate engine owner’s manual. Study
these manuals before operating and keep both handy
for future reference. For the nearest SNAPPER dealer in
your area, check the yellow pages under the heading
LAWN MOWERS. For engine parts and service, look
for the engine manufacturer’s dealers under the
heading, ENGINES - gasoline.
JOYSTICK
CONTROL
HANDLE
KEY
SWITCH
CONTROL PANEL:
ENGINE SPEED
ENGINE CHOKE
BLADE SWITCH
OPERATOR’S SEAT
BRAKE RELEASE
BUTTON
PARKING
BRAKE
DECK
DISCHARGE
DEFLECTOR
FOOT
REST
DECK LIFT
HANDLE
IMPORTANT! The figures and illustrations in this
manual are provided for reference only and may
differ from your specific model. Contact your
Snapper dealer if you have questions
.