Filter
Top Products
9
Section 2 - OPERATING INSTRUCTIONS
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP engine
and blade. Disconnect spark plug wire and secure
away from spark plug. Engine and components are
HOT. Avoid serious burns, allow sufficient time for
all components to cool.
2.7 INSTALLATION of GRASS BAG
(Slide Closure Type, Optional Accessory on
Some Models)
Install grass bag as shown. Adapter must be
installed first, before grass bag can be installed.
A. Install the top wire to the grass bag. Tie the bag
slider to the top wire. Fold bag opening into a "Z"
and pull bag into slider. See Figure 2.9.
FIGURE 2.9
B. Position grass bag between handles. See Figure
2.10. Install grass bag by sliding connector over
flange of adapter. Attach grass bag hooks over
middle handle cross bar. See Figure 2.11.
FIGURE 2.10
FIGURE 2.11
WARNING
DO NOT operate without entire Grass Bag or guard
in place. Grass Bag components are subject to
deterioration during normal use. Inspect frequently
and replace worn or damaged components
immediately.
LOWER HANDLES
HANDLE
BAG CONNECTOR
ADAPTER
FLANGE
HOOK BAG HANDLE
OVER LOWER
HANDLES
SLIDE CONNECTOR
OVER END OF
ADAPTER FLANGE
BAG
SLIDER
“Z” FOLD BAG
AS SHOWN