Filter
Top Products
48", 52" & 61" MOWER DECK ASSY (Frame)
Footnotes
TP 400-5073-IR-CW-N
Manual No. 7006936PRO HYDRO WALK BEHIND MOWERS
SERIES 3
31
Part No Descri
p
tionItem Qty Note
1 7044667 1 SHIELD, Muffler (SPA611)
2 7091318 2 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5
3 7091298 2 NUT, 5/16-18 Hex Nyloc
4 7046580 1 *DECAL, SNAPPER Pro w/Trademark
4 7074862 1 *DECAL, Snapper Pro (silver, 16-1/2” long)
5 7024085 2 WING NUT, 5/16-18
6 7035285 1 COVER, 48” Right
6 7046607 1 COVER, 52” Right
6 7035314 1 COVER, 61” Right
7 7035286 1 COVER, 48” Left
7 7046606 1 COVER, 52” Left
7 7035313 1 COVER, 61” Left
8 7035287 1 COVER, 48” Center
8 7035303 1 COVER, 52” Center
8 7035315 1 COVER, 61” Center
9 7023735 4 KNOB, Hood (5/16-18 thread)
10 7054012 2 ASSEMBLY, Crank (Includes Crank, 7042477,
Handle 7029380 & Roll Pin
7013877)
11 7073593 1 *DECAL, Caution Handle May Be Hot (Adjustable Decks only) replaces 7043815
12 7043816 1 *DECAL, Oil Threads Here (Adjustable Decks only)
13 7017711 2 LYNCH PIN, 7/16” Heavy Duty Also shown on CASTER,
WHEEL & TIRE ASSY page.
14 7021960 2 SPACER, Powdered Metal
15 7046626 4 BUSHING
16 7042780 2 YOKE, Caster Weldment Also shown on CASTER,
WHEEL & TIRE ASSY page.
17 7041817 1 WELDMENT, 48” Deck Frame (shown)
17 7042479 1 WELDMENT, 52” Deck Frame (not shown)
17 7043865 1 WELDMENT, 61” Deck Frame (not shown)
18 7091922 8 NUT, 1/2-13 Hex Nyloc or 7091325
19 7091587 8 WASHER, 1/2” Flat
20 7029258 8 BUSHING, Suspension
21 7029260 4 WASHER, Lift 4 are used on 52” decks; 2 are
used on 61” Decks
22 7046214 2 LIFT WASHER (Weldment)
23 7029259 2 STUD, Lift, 1/2-13 Thread, Both Ends
24 7014669 2 FITTING, Straight Lube (for 3/16” drill)
25 7029295 2 *DECAL, Height of Cut see Decal Page
26 7029263 4 SLEEVE, Suspension
27 7029355 4 BOLT, 1/2-13 x 3-3/4” Hex Head, GR 5
28 7034964 2 ARM, Suspension, 12” Long 48” & 52” Decks
*NOTE: See DECAL page for decal identification.