Filter
Top Products
6
SECTION 1 - FAMILIARIZATION
FIGURE 1.1
1.1 INTRODUCTION
This manual has been prepared for the operator’s of the
SNAPPER PRO GEAR WALK BEHIND MOWER. Its
purpose, aside from recommending standard operating
procedures and routine service requirements, is to
promote SAFETY through the use of accepted operating
practices. Read, Understand and Follow the IMPORTANT
SAFETY INSTRUCTIONS on Pages 2 thru 4 of this
manual and All SAFETY messages on the PRO GEAR
WALK BEHIND MOWER and its attachments before
operating. SNAPPER recommends returning the
MACHINE to an authorized SNAPPER dealer annually for
inspection and addition of any new devices which might
upgrade the safety of the mower.
1.2 NOMENCLATURE
It is recommended that all operator’s of this equipment
become thoroughly familiar with the controls,
components, and operation of this machine before
operating. Specific details involving the engine are
found in the separate engine owner’s manual. Study
these manuals before operating and keep both handy for
future reference. For the nearest SNAPPER dealer in
your area, check the yellow pages under the heading
LAWN MOWERS. For engine parts and service, look for
the engine manufacturer’s dealers under the heading,
ENGINES - gasoline.
OPERATOR’S
PRESENCE
CONTROL (OPC)
TRACTION
LOCK
TRANSMISSION SHIFT
LEVER
KEY
SWITCH
OPERATOR’S
PRESENCE
CONTROL (OPC)
L.H. TRACTION
LEVER
ENGINE SPEED
CONTROL
STARTER ROPE
AIR FILTER
MUFFLER
DECK COVER
DECK
(48” SHOWN)
FRONT TIRES
DECK HEIGHT
ADJUSTMENT SPACERS
CASTER
WHEEL
ASSEMBLY
DISCHARGE
DEFLECTOR
REAR TIRES
COVER
RETAINING
KNOBS
BELT
COVER
FUEL
CAP
R.H. TRACTION
LEVER
IMPORTANT
The figures and illustrations in this manual
are provided for reference only and may differ
from your specific model. Contact your
Snapper dealer if you have questions.