Filter
Top Products
7
REAR DECK ASSEMBLY
ITEM PART NO. DESCRIPTION
1 1-6147 SPACER, Clutch (Model Year 97 Hydro uses 2)
2 9-0247 WASHER, 7/16” Split
3 2-6978 BRACKET, Capacitor (Kawasaki Engines Only)
4 9-1029 SCREW, M10-1.5 x .55 Hex Head Cap (Kawasaki)
-- 2-7266 BOLT, 7/16-20 x 3” Hex Head Cap, Grade 5 (Briggs & Kohler)
5 2-7264 BUSHING, 1-1/2” O.D. x 1” I.D.
6 3-4801 BRACKET, Pivot
7 3-4802 BRACKET, Wheel (2)
8 3-4829 BRACKET, Clutch (not used if item 28 is used)
9 9-1303 BOLT, 5/16-18 x 1”, Round Head Short Square Neck, Grade 5
10 9-1527 SCREW, 5/16-18 x 1-1/4”, Grade 5 (3)
11 9-0563 SCREW, 3/8-16 x 1”, Hex Head Cap Grade 5 (12)
12 9-1706 NUT, 5/16-18 Top Lock, Grade B
13 9-1704 NUT, 3/8-16 Hex Top Lock, Grade B (14)
14 1-7063 CLUTCH, Electric
15 4-1745 DECK, Rear (Weldment)
16 2-7194 NUT, Pack (2)
17 9-0206 SCREW, 5/16-18 x 3/4”, Grade 2 (3)
18 2-7215 CAPACITOR, Kawasaki Engine
19 2-9615 V-BELT, HA4950 Engine/Hydro (49.50” Effective Length)
20 2-7128 MOTOR, Wheel (2)
21 2-9704 BUMPER, Electric Clutch
22 3-4448 SUPPORT, Electric Clutch Bumper
23 2-7132 PULLEY, Engine/Hydro 4”
24 9-1719 KEY, 1/4” Square X 1”
25 2-9255 BELT, Engine/Deck (36”)
-- 2-9267 BELT, Engine/Deck (52”)
-- 2-9269 BELT, Engine/Deck (61”)
26 1-5861 CLIP, Harness (Briggs Only)
27 1-2830 KEY, 3/16” Square x 3/4” (2)
28 4-2663 BRACE, Engine Frame (used on models indicated by “X” in table below)
(See Note Below)
29 1-5861 CLIP, Harness (for battery drain hose, SPLH180KHE only)
*NOTE: THERE ARE ONLY CERTAIN MODELS THAT USE ENGINE FRAME BRACE 4-2663. USE
CHART FOR SPECIFIC POWER/UNIT/MOWER UNIT COMBINATIONS.
PRO HYDRO MID-SIZE WBM SERIES 0 MANUAL No. 06926