Snapper Snower Thrower Snow Blower User Manual


 
PART NO. DESCRIPTIONREF NO. QTY.
Spout Group
Footnotes
1 1702219 4 SPACER
2 1921319 6 WASHER
3 1960126 4 NUT PUSH, Capped, 1/4
4 1611945 1 ROD
5 1611939 1 SPRING, Compression
6 1721601 1 CHUTE & DEFLECTOR ASSEMBLY
7 1923358 1 LOCKNUT, Hex, 1/4-20
8 1724604 1 PINION, 15 Teeth
9 1925003 3 SCREW, Hex Head, Taptite, 1/4-20 x 1/2
10 1717481 1 COVER
11 1725464 1 PLATE, Motor Mounting
12 1923341 2 CAPSCREW, Hex Head, 1/4-20 x 3/4
13 1924009 8 CAPSCREW, Hex Head, 1/4-20 x 7/8
14 1930547 1 SCREW, Set Hex, #10-24 x 3/8
15 1721617 1 ROD & TAB ASSEMBLY
16 1701011 1 TIE, Self Locking
17 1916622 4 NUT, Hex, 1/4 x 20
18 1916964 7 LOCKWASHER, 1/4
19 1960151 2 WASHER
20 1668344 1 PIN, Flat Head, Drilled, SS
21 1960221 1 CLIP, Hair Pin
22 1705920 1 BRACKET
23 1721590 1 BRACKET
24 1717482 1 CABLE & KNOB ASSEMBLY
25 1715885 1 MOTOR, Electric
26 1717483 1 HARNESS ASSEMBLY
27 1666613 3 HOLD DOWN
28 1717477 1 GEAR, Chute
29 1704446 1 GUARD & SUPPORT ASSEMBLY
30 1960683 3 SCREW, Hex Washer Head, Taptite Washer, #10-24 x 7/8
31 1931333 1 CARRIAGE BOLT, 5/16-18 x 3/4
32 960210 1 WASHER, 5/16
33 1919326 1 WASHER, 5/16
34 1919438 1 LOCKNUT, Hex, ESNA, 5/16-18
35 1715799 1 HANDLE "T"
The above parts group applies to the following Mfg. Nos.:
2003
14
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
1694404 - 47" Two Sta
g
e
TP 400-3880-00-AT-SMAN