Snapper Snow Thowers Snow Blower User Manual


  Open as PDF
of 3
 
2
STEP 4: Measure auger clutch control cable extension from
a relaxed position to full extended position. Proper extension
should be between 1/2” minimum to 3/4”maximum
extension. NOTE: Measure from the top of spring (The top
is in relation to where spring hooks into auger clutch
control). Loosen jam nut at the upper end of cable. Hold
threaded end of cable and then turn cable clockwise until
correct extension is achieved. Retighten jam nut.
IMPORTANT: DO NOT over tighten cable. The cable must
have slack for the auger brake to function properly. See
Figure 4.
FIGURE 4
CABLE
HOUSING
JAM
NUT
AUGER CONTROL
CABLE
CABLE SPRING
SHOULD EXTEND
1/2’’ TO 3/4’’
 previous