Filter
Top Products
33
English
3. Some models have gauge wheels on the mower deck. If
equipped, remove the gauge wheels.
4. Move the deck lift lever to the LEVEL ADJUSTMENT
position (Figure 39).
WARNING: The deck lift lever is spring loaded.
Make sure the lift lever is locked in the LEVEL
ADJUSTMENT position.
5. Loosen the left and right adjuster knobs (Figure 40).
Push down on each side of the mower deck. Make sure
both sides of the mower deck are setting on a flat
surface. Also, make sure the lift links are loose and can
easily move up or down.
6. Push down on the lift links and tighten the left and
right adjuster knobs (Figure 40). Make sure the
adjuster knobs are tight. If necessary, use a wrench to
tighten the adjuster knobs. For plastic adjuster knobs,
tighten to a torque of 7 foot pounds (9,5 Nm). For
metal adjuster knobs, tighten to a torque of 10 foot
pounds (13,5 Nm).
7. Raise the deck lift lever from the LEVEL ADJUSTMENT
position to a CUTTING HEIGHT position (Figure 41).
8. If equipped, install the gauge wheels.
9. Mow for a short distance. If the height of cut is not
level, repeat the above steps.
CAUTION: Do not operate with the mower deck in the
LEVEL ADJUSTMENT position. If you operate in the LEVEL
ADJUSTMENT position, the mower deck and blades can be
damaged.
Figure 39: Lever adjustment
A - Deck lift lever
B - LEVEL ADJUSTMENT positon
C - CUTTING HEIGHT positions
Figure 40: Loosening adjuster knobs
A - Lift link
B - Adjuster knobs
Figure 41: Cutting position
A - Deck lift lever
B - CUTTING HEIGHT positions
Replacing the Motion Drive Belt
The motion drive belt is designed for extremely long life, and
with proper care and maintenance, it should last for the life
of the unit. However, in the unlikely event that the motion
drive belt should require replacement, it should be
performed only by an authorized dealer.
A
B
A
B
B
A
C