Filter
Top Products
Safety Instructions & Operator’s Manual for
SCRAMBLER
ZERO-TURN
HYDRO DRIVE
SERIES 6
MODELS
SZT18426BVE
SZT20486BVE
MODEL NUMBER EXPLANATION
S Z T 18 42 6 B V E
MODEL DESIGNATION ENGINE OPTIONS
DRIVE SYSTEM TYPE ENGINE TYPE
ENGINE HORSE POWER * ENGINE MODEL
CUTTING WIDTH SERIES DESIGNATION
S – SCRAMBLER
ZT – Zero Turn
18 – 16 HP Engine
20 – 20 HP Engine
42 - 42” Cutting Deck
48 - 48” Cutting Deck
6 - Series Designation B - Briggs Engine
V – Over Head Valve
E - Electric Start
Thank you for buying a SNAPPER Product! Before operating your SCRAMBLER, read this manual carefully and
pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 - 4. Remember that all power
equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in
accordance with the operating instructions and common sense!
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
COPYRIGHT © 2004
SNAPPER – A DIVISION OF SIMPLICITY MFG. INC.
ALL RIGHTS RESERVED
MANUAL No. 5-0408 (I.R. 7/27/04)